From: Tony Medeiros (tonygreat@xxxxxxxx)
Date: Thu Sep 07 2000 - 11:09:22 GMT-3
   
Isn't that "atm bind" command used when you have a 5500 with LS1010 in the
chassis and the fabric intergration module?   Supposed to let you bind and
interface on the lane card to a PVC or SVC in the ATM switch without using
and external cable.  Correct me anybody if way off.
Thanks
Tony
----- Original Message -----
From: "Matt Lachberg 3" <Cisco@datastreet.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, September 07, 2000 10:12 AM
Subject: atm on cat atm module
> I can get Lane to work on the atm module in a catalyst, but I can't get
> pvc's and svc's and I also don't see the arp server ? command, so I guess
I
> cannot configure clip.  Can anyone confirm or disconfirm.
>
> I tried the atm bind command for the pvc, but I couldn't get unicasts to
> work?
>
> R5E1------vlan 30----cat(atm mod)---------0/0/0 ls1010 0/0/1--------atm0R8
>
>
> Pvc attempt:
> Atm module config:
>
> !
> interface Ethernet0
> !
> interface ATM0
>  atm pvc 2 0 16 ilmi
>  atm pvc 3 0 5 qsaal
> !
> interface ATM0.3 multipoint
>  atm pvc 1 1 33 aal5snap
>  atm bind pvc vlan 1 30
> !
>
>
> 3640
> interface ATM0
>  no ip address
>  ip directed-broadcast
>  pvc 0/5 qsaal
>  !
>  pvc 0/16 ilmi
>  !
>  no atm ilmi-keepalive
> !
> interface ATM0.3 multipoint
>  ip address 138.7.58.8 255.255.255.0
>  ip directed-broadcast
>  pvc 1/32
>   protocol ip 138.7.58.4 broadcast
>   protocol ip 138.7.58.5 broadcast
>   encapsulation aal5snap
> !
> router eigrp 1
>  network 138.7.0.0
>
>
> R5
> !
> !
> interface Ethernet0/0
>  ip address 138.7.58.5 255.255.255.0
> !
> interface Ethernet0/1
>  no ip address
>  shutdown
> !
> router eigrp 1
>  network 138.7.0.0
>
>
> ls1010
> !
> interface ATM0/0/0
>  no keepalive
> !
> interface ATM0/0/1
>  no keepalive
>  atm pvc 1 33  interface  ATM0/0/0 1 32
> !
>
> ATM sucks!!!, no wait, my doctor said not to yell, sh*#, cool down, it'll
be
> ok matt, it'll be ok.......
>
> Matthew Lachberg, CCNP, CCDP, MCSE
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:53 GMT-3