Re: [4000 flash erased, help!]

From: Scott (trig@xxxxxxx)
Date: Thu Sep 07 2000 - 11:35:37 GMT-3

• Next message: Geatti: "RE: OSPF Router ID not advertised, causing problems"
• Previous message: Tony Medeiros: "Re: atm on cat atm module"
• Next in thread: Brian Hescock: "Re: [4000 flash erased, help!]"
• Maybe reply: Brian Hescock: "Re: [4000 flash erased, help!]"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Heya Jim

If you are in the boot mode you can still tftp but if your ethernet card is a
FE the boot mode will not recognize it so you will need to go over your serial
link (I hope you have one!) or a regular ethernet card.

If you are in the ROMMON mode there isnt a lot you can do unless you know
someone with a 4000 or are James Bond..

Scotty

Jim Bond <trycisco@yahoo.com> wrote:
Hello,

I accidentally erased my 4000 router flash and can't
boot up. It didn't recognize my ethernet port so won't
boot from net.

How do I recover the IOS?

Thanks in advance.

Jim

• Next message: Geatti: "RE: OSPF Router ID not advertised, causing problems"
• Previous message: Tony Medeiros: "Re: atm on cat atm module"
• Next in thread: Brian Hescock: "Re: [4000 flash erased, help!]"
• Maybe reply: Brian Hescock: "Re: [4000 flash erased, help!]"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:53 GMT-3