From: Sam Munzani (sam@xxxxxxxxxxx)
Date: Thu Sep 07 2000 - 02:07:32 GMT-3
Do you an option for encap SDE?
Sam
----- Original Message -----
From: "mark salmon" <masalmon@cisco.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, September 07, 2000 1:05 AM
Subject: Re: Inter Vlan routing and 36xx
> Thanks to all who responded. Apparently I was not clear enough. Here is
> what I did:
>
> In config mode I did
>
> int fast 0/1.1
>
> In sub interface mode I did e? and all I saw was exit.
>
> What I asked was did anyone on the list successfully configured inter
> vlan routing on a 3600 series router as I was unable to find information
> in the documentation relating to a 3600 router.
>
> I am aware that 7xxx router supports inter vlan routing in fast/gig
> interfaces.
>
> Is there someone out there who was able to do it on a 3600 series
> router?
>
>
>
> Sam Munzani wrote:
> >
> > You have to do following.
> > If your fastEthernet interface is 1/1 then,
> >
> > int fast 1/1.1
> > encap isl 1 <== Where 1 is VLAN number for the trunk.
> >
> > You can't do trunk on main interface.
> >
> > Sam
> > ----- Original Message -----
> > From: "mark salmon" <masalmon@cisco.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Wednesday, September 06, 2000 11:26 PM
> > Subject: Inter Vlan routing and 36xx
> >
> > > Has anyone been able to do inter vlan routin between a cat switch and
a
> > > 36xx router with fast eth interfaces? I tried and the one I am using
> > > (on Vlabs by mentor labs) there is no encap isl command available.
> > > --
> > >
> > >
> > >
> > > Mark Salmon
> > > Cisco Systems Inc
> > > Phone:773-695-8235
> > > Pager:800-365-4578
> > > email: masalmon@cisco.com
> > > Empowering The Internet Generation.
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:53 GMT-3