From: Kenneth Kriel (ken@xxxxxxxxx)
Date: Sat Sep 02 2000 - 10:44:46 GMT-3
Gentleman,
My Problem, apple routing table on r1 is missing route from e0 on r3 ! I
believe I have configured everything I need ! Thank you in advance !
My layout is as follows :
--e0--r3--- ---r1
||
Frame
||
||
Serial0/0
||
Router2
Configs :
>>>>>>>>>>>>>>>>>>>>>>>>
Router 3
hostname R3
appletalk routing eigrp 300
appletalk route-redistribution
!
interface FastEthernet0/0
appletalk cable-range 500-510 500.1
appletalk zone vlanx
!
interface Serial0/0
encapsulation frame-relay
no fair-queue
!
interface Serial0/0.1 point-to-point
appletalk cable-range 200-200 200.5
appletalk zone frame
appletalk protocol eigrp
no appletalk protocol rtmp
frame-relay interface-dlci 302 !pvc pointing to R2
R2
!
hostname R2
!
appletalk routing eigrp 200
appletalk route-redistribution
appletalk local-routing
!
interface Ethernet0/0
appletalk cable-range 300-310 300.2
appletalk zone vlanz
!
interface Serial0/0
encapsulation frame-relay
appletalk cable-range 200-200 200.2
appletalk zone frame
appletalk protocol eigrp
no appletalk protocol rtmp
no appletalk eigrp-splithorizon
frame-relay map appletalk 200.1 201 broadcast ! pvc to R1
frame-relay map appletalk 200.5 203 broadcast ! pvc to R3
no frame-relay inverse-arp
!
Router 1
hostname R1
appletalk routing eigrp 100
!
interface Serial0
appletalk cable-range 200-200 200.1
appletalk zone frame
appletalk protocol eigrp
no appletalk protocol rtmp
frame-relay map appletalk 200.2 102 broadcast
frame-relay map appletalk 200.5 102 broadcast ! pvc pointing to R2
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:51 GMT-3