From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Sat Sep 02 2000 - 10:09:08 GMT-3
I'll try to find out why it's not on the CD or CCO and get it added. I've run
into this situation before and couldn't get it to work either until someone
told me about "apple local-routing" (global config) and it started working
instantaneously.
Brian
Simon Baxter wrote:
> Try the old and faithful :
>
> apple local routing (global)
>
> You'll find NO reference to this command on the CD or CCO, but seems to fix
> a bug where an apple interface won't route between a single locally attached
> interface - similar to the split-horizon thing.
>
> please let me know if this works - I've not had to use this command but have
> heard it mentioned regularly...
>
> Simon
>
> -----Original Message-----
> From: Kenneth Kriel [mailto:ken@flane.com]
> Sent: Saturday, September 02, 2000 11:45 PM
> To: 'Ccielab
> Subject: Apple - eigrp - over frame relay
>
> Gentleman,
>
> My Problem, apple routing table on r1 is missing route from e0 on r3 ! I
> believe I have configured everything I need ! Thank you in advance !
>
> My layout is as follows :
>
> --e0--r3--- ---r1
> ||
> Frame
> ||
> ||
> Serial0/0
> ||
> Router2
>
> Configs :
>
> >>>>>>>>>>>>>>>>>>>>>>>>
>
> Router 3
>
> hostname R3
> appletalk routing eigrp 300
> appletalk route-redistribution
> !
> interface FastEthernet0/0
> appletalk cable-range 500-510 500.1
> appletalk zone vlanx
> !
> interface Serial0/0
> encapsulation frame-relay
> no fair-queue
> !
> interface Serial0/0.1 point-to-point
> appletalk cable-range 200-200 200.5
> appletalk zone frame
> appletalk protocol eigrp
> no appletalk protocol rtmp
> frame-relay interface-dlci 302 !pvc pointing to R2
>
> R2
>
> !
> hostname R2
> !
> appletalk routing eigrp 200
> appletalk route-redistribution
> appletalk local-routing
> !
> interface Ethernet0/0
> appletalk cable-range 300-310 300.2
> appletalk zone vlanz
>
> !
> interface Serial0/0
> encapsulation frame-relay
> appletalk cable-range 200-200 200.2
> appletalk zone frame
> appletalk protocol eigrp
> no appletalk protocol rtmp
> no appletalk eigrp-splithorizon
>
> frame-relay map appletalk 200.1 201 broadcast ! pvc to R1
> frame-relay map appletalk 200.5 203 broadcast ! pvc to R3
> no frame-relay inverse-arp
> !
>
> Router 1
>
> hostname R1
>
> appletalk routing eigrp 100
> !
> interface Serial0
> appletalk cable-range 200-200 200.1
> appletalk zone frame
> appletalk protocol eigrp
> no appletalk protocol rtmp
> frame-relay map appletalk 200.2 102 broadcast
> frame-relay map appletalk 200.5 102 broadcast ! pvc pointing to R2
>
> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:51 GMT-3