From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Sat Sep 02 2000 - 10:32:17 GMT-3
fyi: "Appletalk local-routing" resulted from bug CSCdi39096 and the command
reference apparently slipped through the cracks. I've sent an e-mail to the
appropriate people and asked them to add the command reference to CCO and
UniverCD and to treat the request as a Priority 2 because it's a very
significant command.
Brian
Simon Baxter wrote:
> Try the old and faithful :
>
> apple local routing (global)
>
> You'll find NO reference to this command on the CD or CCO, but seems to fix
> a bug where an apple interface won't route between a single locally attached
> interface - similar to the split-horizon thing.
>
> please let me know if this works - I've not had to use this command but have
> heard it mentioned regularly...
>
> Simon
>
> -----Original Message-----
> From: Kenneth Kriel [mailto:ken@flane.com]
> Sent: Saturday, September 02, 2000 11:45 PM
> To: 'Ccielab
> Subject: Apple - eigrp - over frame relay
>
> Gentleman,
>
> My Problem, apple routing table on r1 is missing route from e0 on r3 ! I
> believe I have configured everything I need ! Thank you in advance !
>
> My layout is as follows :
>
> --e0--r3--- ---r1
> ||
> Frame
> ||
> ||
> Serial0/0
> ||
> Router2
>
> Configs :
>
> >>>>>>>>>>>>>>>>>>>>>>>>
>
> Router 3
>
> hostname R3
> appletalk routing eigrp 300
> appletalk route-redistribution
> !
> interface FastEthernet0/0
> appletalk cable-range 500-510 500.1
> appletalk zone vlanx
> !
> interface Serial0/0
> encapsulation frame-relay
> no fair-queue
> !
> interface Serial0/0.1 point-to-point
> appletalk cable-range 200-200 200.5
> appletalk zone frame
> appletalk protocol eigrp
> no appletalk protocol rtmp
> frame-relay interface-dlci 302 !pvc pointing to R2
>
> R2
>
> !
> hostname R2
> !
> appletalk routing eigrp 200
> appletalk route-redistribution
> appletalk local-routing
> !
> interface Ethernet0/0
> appletalk cable-range 300-310 300.2
> appletalk zone vlanz
>
> !
> interface Serial0/0
> encapsulation frame-relay
> appletalk cable-range 200-200 200.2
> appletalk zone frame
> appletalk protocol eigrp
> no appletalk protocol rtmp
> no appletalk eigrp-splithorizon
>
> frame-relay map appletalk 200.1 201 broadcast ! pvc to R1
> frame-relay map appletalk 200.5 203 broadcast ! pvc to R3
> no frame-relay inverse-arp
> !
>
> Router 1
>
> hostname R1
>
> appletalk routing eigrp 100
> !
> interface Serial0
> appletalk cable-range 200-200 200.1
> appletalk zone frame
> appletalk protocol eigrp
> no appletalk protocol rtmp
> frame-relay map appletalk 200.2 102 broadcast
> frame-relay map appletalk 200.5 102 broadcast ! pvc pointing to R2
>
> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:51 GMT-3