2nd attempt at a question!!

From: Simon Baxter (Simon.Baxter@xxxxxxxxxxxxxx)
Date: Fri Aug 25 2000 - 10:50:31 GMT-3

   
I'm doing a test lab which has asked me if there's any way to advertise
routes to loopback interfaces as anything but /32 routes.

I can't see any way around this :

    Link connected to: a Stub Network
     (Link ID) Network/subnet number: 130.130.33.1
     (Link Data) Network Mask: 255.255.255.255
      Number of TOS metrics: 0
       TOS 0 Metrics: 1

R4#sh ip os int lo0
Loopback0 is up, line protocol is up
  Internet Address 130.130.33.1/24, Area 0.0.0.0
  Process ID 10, Router ID 130.130.33.1, Network Type LOOPBACK, Cost: 1
  Loopback interface is treated as a stub Host
R4#

No matter what I do, it always stays as "Loopback interface is treated as a
stub Host"

Is this a trick question???

I'm losing WAY too much sleep over it..

Simon

   application/ms-tnef

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:30 GMT-3