From: Simon Baxter (Simon.Baxter@xxxxxxxxxxxxxx)
Date: Fri Aug 25 2000 - 11:38:01 GMT-3
That's just being too clever Earl!!!
> -----Original Message-----
> From: Earl Aboytes [mailto:earl@linkline.com]
> Sent: Saturday, August 26, 2000 12:37 AM
> To: Geatti; Simon Baxter; CCIE Group Study (E-mail)
> Subject: RE: 2nd attempt at a question!!
>
> The trick here is to not put the loopback into any area. Use a
> redistribute connected and use a restrictive route-map. Then you can use
> the summary-address command.
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Earl Aboytes CCIE #6097
> Senior Technical Consultant
> GTE Managed Solutions
> 805-381-8817
> earl.aboytes@verizon.com
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]
>
> Sent: Friday, August 25, 2000 8:24 AM
> To: Simon Baxter; CCIE Group Study (E-mail)
> Subject: RE: 2nd attempt at a question!!
>
> I forgot, you could also put them into there own area and
> summarize into area 0 as whatever mask you choose. 'Area 5 range
> 120.1.1.0.0 255.255.0.0' would take a loop of 120.1.1.1 /32 and advertise
> it to other areas as 120.1.0.0 /16.
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of Simon Baxter
> Sent: Friday, August 25, 2000 9:51 AM
> To: CCIE Group Study (E-mail)
> Subject: 2nd attempt at a question!!
>
> I'm doing a test lab which has asked me if there's
> any way to advertise routes to loopback interfaces as anything but /32
> routes.
>
> I can't see any way around this :
>
> Link connected to: a Stub Network
> (Link ID) Network/subnet number: 130.130.33.1
> (Link Data) Network Mask: 255.255.255.255
> Number of TOS metrics: 0
> TOS 0 Metrics: 1
>
> R4#sh ip os int lo0
> Loopback0 is up, line protocol is up
> Internet Address 130.130.33.1/24, Area 0.0.0.0
> Process ID 10, Router ID 130.130.33.1, Network
> Type LOOPBACK, Cost: 1
> Loopback interface is treated as a stub Host
> R4#
>
>
> No matter what I do, it always stays as "Loopback
> interface is treated as a stub Host"
>
>
> Is this a trick question???
>
> I'm losing WAY too much sleep over it..
>
>
> Simon
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:30 GMT-3