From: Erick B. (erickbe@xxxxxxxxx)
Date: Fri Aug 04 2000 - 15:08:24 GMT-3
router bgp 7
neighbor 138.7.2.254 route-map setcomm out
neighbor 138.7.2.254 send-comm
--- Earl Aboytes <earl@linkline.com> wrote:
> I am sending a community to my neighbor but I am not
> seeing the community
> with a sh ip bgp community at the neighbor.
>
> I have two routers that are neighbored. One in AS7
> and the other in AS 25
> I have a route-map that matches on all addresses and
> set the community to
> no-export.
> When I go to the neighbor and do a sho ip bgp
> community I cannot see
> anything.
>
> access-list 35 permit any
> route-map setcomm permit 10
> match ip address 35
> set community no-export
> router bgp 7
> neighbor 138.7.2.254 route-map setcomm out
>
> Any ideas?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:21 GMT-3