From: damien (damien@xxxxxxxxxxx)
Date: Sun Aug 06 2000 - 14:26:07 GMT-3
Have you specified the community with "ip communtity"command and I don't see
the "neighbor x.x.x.x send-community" also
----- Original Message -----
From: "Earl Aboytes" <earl@linkline.com>
To: <ccielab@groupstudy.com>
Sent: Friday, August 04, 2000 7:04 AM
Subject: bgp community
> I am sending a community to my neighbor but I am not seeing the community
> with a sh ip bgp community at the neighbor.
>
> I have two routers that are neighbored. One in AS7 and the other in AS 25
> I have a route-map that matches on all addresses and set the community to
> no-export.
> When I go to the neighbor and do a sho ip bgp community I cannot see
> anything.
>
> access-list 35 permit any
> route-map setcomm permit 10
> match ip address 35
> set community no-export
> router bgp 7
> neighbor 138.7.2.254 route-map setcomm out
>
> Any ideas?
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Earl Aboytes
> Senior Technical Conultant
> GTE Managed Solutions
> 805-381-8817
> earl.aboytes@verizon.com
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:21 GMT-3