From: Joel W. Ekis (jekis@xxxxxxxxx)
Date: Fri Aug 04 2000 - 15:52:45 GMT-3
Keep in mind that this radically changes the function of the C6k. For instance
, every port is a L3 port by default.
Research this with your SE/partner before you change to IOS SLB.
Joel
At 01:19 PM 8/4/2000 -0400, Simcha Blatter wrote:
>The 6509 can only support IOS SLB using IOS based flash for the SUP engine
>with the MSFC.
>Normally, you have a flash image for the Sup engine and separate IOS image
>for the MSFC.
>There is a single IOS version for the entire switch that supports both the
>Sup engine and the MSFC.
>
>The IOS image that supports this is: SC6SUPC-12101E Catalyst 6000 SUPERVISOR
>IOS IP
>A license is also needed: FR-IOSSLB Catalyst 6000 Supervisor IOS SLB Feature
>License
>
>With this release of the IOS the command set for the switch is entirely IOS
>command driven.
>
>Simcha
>
>*****************************************************************
>Simcha Blatter, Systems Architect
>CCDP, CCNP, EMCess, MCSE, MCNE
>Dimension Data ISG
>
>
>-----Original Message-----
>From: Sam Munzani [mailto:sam@chinet.com]
>Sent: Friday, August 04, 2000 12:43 PM
>To: ccielab
>Subject: Can Catalyst 6509 do load balancing like local director?
>
>
>Hi Everybody,
>
>I have a technical questions about Catalyst 6509. Show version tells that
>that it does have load balancing feature.
>
>My Needs:
>12 servers located on 1 VLAN need to do load balancing for a web
>application we have. Any suggestions or finger pointing will appreciated.
>
>Regards,
>
>Sam
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:21 GMT-3