From: Robert LaGrasse (rlagras1@xxxxxxxxxxxxxxx)
Date: Thu Jul 27 2000 - 12:18:24 GMT-3
How is the router setup? Is there an activation script on the attached line
that may be overriding what you manually entered? Does the modem return an
OK when you do an AT&w? Are your dip switches set to default to factory
settings? Did anyone unknown to you pack you bags or ask you to carry
anything onto the aircraft? Will Batman and the Boy Wonder be able to escape
the Penguins Plot?
-B
-----Original Message-----
From: Philip Lai <philip@home.com.hk>
To: ccielab@groupstudy.com <ccielab@groupstudy.com>
Date: Thursday, July 27, 2000 7:46 AM
Subject: US Robotic modem command !
>Hi, maybe it is sligthly out of the topic. Every time I reverse telnet to
>the US Robotic modem and
>type a "at&fs0=1" then "at&w". The modem is working correctly and can
>receive incoming call.
>
>However, if I switch off the modem and switch on again, all the setting in
>the modem will lost. Thus, I have
>to repeat the above procedure again.
>
>Any body can give me some guideline from the "AT" command on how to store
>the config in the modem and how to display them ?
>
>Thanks.
>
>Philip Lai
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:58 GMT-3