From: Jason T. Rohm (jtrohm@xxxxxxxxxxx)
Date: Thu Jul 27 2000 - 12:19:11 GMT-3
Two things...
First, try at&w0.
Second, the Sportster has a dip switch settings to override the written
config with the factory defaults... check that one out.
-Jason
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Philip Lai
Sent: Thursday, July 27, 2000 9:18 AM
To: ccielab@groupstudy.com
Subject: US Robotic modem command !
Hi, maybe it is sligthly out of the topic. Every time I reverse telnet to
the US Robotic modem and
type a "at&fs0=1" then "at&w". The modem is working correctly and can
receive incoming call.
However, if I switch off the modem and switch on again, all the setting in
the modem will lost. Thus, I have
to repeat the above procedure again.
Any body can give me some guideline from the "AT" command on how to store
the config in the modem and how to display them ?
Thanks.
Philip Lai
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:58 GMT-3