From: Geatti (geatti@xxxxxxxx)
Date: Tue Jul 25 2000 - 22:49:26 GMT-3
I have a couple of modems hanging off two of my routers going through a pots
simulator. I have the line responding to interesting traffic (IP) but can't
seem to get routing working over the line. What am I overlooking? Async line
configs below. I can ping but can't route over the interfaces?? Appreciate
any help as I am stuck and have no hair left.
R3 config
interface Async1
ip address 10.10.10.1 255.255.255.0
ip directed-broadcast
encapsulation ppp
dialer in-band
dialer idle-timeout 200
dialer map ip 10.10.10.2 name R2 modem-script fred broadcast 40
dialer-group 1
async dynamic routing
async mode dedicated
ppp authentication chap
R2 config
interface Async1
ip address 10.10.10.2 255.255.255.0
encapsulation ppp
async dynamic routing
async mode dedicated
dialer in-band
dialer map ip 10.10.10.1 name R3
ppp authentication chap
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:58 GMT-3