From: Sam Munzani (sam@xxxxxxxxxxx)
Date: Wed Jul 26 2000 - 18:38:09 GMT-3
I thought "async mode dedicated" is for null modem cable aux to aux port.
Not sure though. I could never make async routing work with AUX port and
modems. If you ever get it working please e-mail me your configs. I want to
see what makes it so difficult.
Sam
> Try with a dialer interface. I think this should solve your problem.
>
> Frederic
>
> Geatti wrote:
> >
> > Nice catch on the Broadcast statement on R2 Xuping - thanks.
> > Still doesn't work though. I've tried RIP, IGRP, EIGRP and OSPF, none of
> > them work over my POTS connection.
> > I do a debug ip RIP and all I get is updates send to the loopbacks, it's
as
> > if the routing process doesn't know that the async 1 interface exists on
> > either router in order to send the broadcast/multicast out, even though
it
> > is included in the RIP process as 10.0.0.0 and both status and protocol
are
> > UP UP.
> >
> > Ping :-) can ping and telnet through line all day works fine
> > Route :-( routing broke.
> >
> > Appreciate any contributions,
> > Marco
> >
> > (Router2-aux)---modem-------modem----(aux-Router3)
> >
> > R3 config - (has loop of 3.3.3.3 255.255.255.0)
> >
> > interface Async1
> > ip address 10.10.10.1 255.255.255.0
> > ip directed-broadcast
> > encapsulation ppp
> > dialer in-band
> > dialer idle-timeout 200
> > dialer map ip 10.10.10.2 name R2 modem-script fred broadcast 40
> > dialer-group 1
> > async dynamic routing
> > async mode dedicated
> > ppp authentication chap
> >
> > router rip
> > network 10.0.0.0
> > network 3.0.0.0
> >
> > R2 config - (has loop of 2.2.2.2 255.255.255.0)
> >
> > interface Async1
> > ip address 10.10.10.2 255.255.255.0
> > encapsulation ppp
> > async dynamic routing
> > async mode dedicated
> > dialer in-band
> > dialer map ip 10.10.10.1 name R3 broadcast
> > ppp authentication chap
> >
> > router rip
> > network 10.0.0.0
> > network 2.0.0.0
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > xuping
> > Sent: Tuesday, July 25, 2000 9:20 PM
> > To: Geatti; ccielab@groupstudy.com
> > Subject: async routing
> >
> > >R2 config
> > >
> > >interface Async1
> > > ip address 10.10.10.2 255.255.255.0
> > > encapsulation ppp
> > > async dynamic routing
> > > async mode dedicated
> > > dialer in-band
> > > dialer map ip 10.10.10.1 name R3
> > > ppp authentication chap
> >
> > Hi
> >
> > in R2 dialer map, add "brocast", since most routing protcol use brocast
or
> > multicast.
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:58 GMT-3