From: Nnanna Obuba (obuba@xxxxxxxxxxxxxxxx)
Date: Fri May 05 2000 - 19:01:45 GMT-3
So what's the use of border peers?
----- Original Message -----
From: "Asbjorn Hojmark" <Asbjorn@Hojmark.ORG>
To: "'Li Chaoyong'" <hughcyli@holybridge.com.cn>
Cc: "'GROUPSTUDY CCIELAB'" <ccielab@groupstudy.com>
Sent: Friday, May 05, 2000 5:32 PM
Subject: RE: An DLSW PROBLEM
>
> > R1-------------R2---------------R3
> >
> > R1 have dlsw peer with R2. R2 have dlsw peer with R3. R1 have
> > not dlsw peer with R3. R1 still can communication with R3. How
> > to do?
> >
> > Border peers are not allow to use.
>
> Border peers aren't necessary for this. If you set it up in the
> lab, you'll see that it works with only two peers. DLSw doesn't
> need to be fully meshed (as does RSRB, IIRC).
>
> HTH,
> -A
> --
> Heroes: Vint Cerf & Bob Kahn, Leonard Kleinrock, Robert Metcalfe
> Links : http://www.hojmark.org/networking/
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:27 GMT-3