From: Kevin Baumgartner (kbaumgar@xxxxxxxxx)
Date: Fri May 05 2000 - 19:24:02 GMT-3
I am taking a few months to prepare for the next lab. I am going through all
the cciebootcamp labs. The last time I took the test I found that I spend more
time than I should have setting up basic stuff. This really had a effect later
in the
first day when I ran into questions that I had to do research on and didn't hav
e the
time. And I really cramed before the last test. This isn't a good approach.
Cciebootcamp has improved my time setting up the basic stuff and it also has
gone
into a lot of things I never worked on before. It's very good.
Kevin
At 04:55 PM 5/5/00 -0400, you wrote:
>Looks like a cut-and-paste error. I also sent Marc mail about a couple of do
c errors I found while going throught the labs. But, you should find that its
money well spent if you hammer on these babies for a few weeks prior to the lab
>
>Bill
>CCIE #5860
>
>At 02:36 PM 5/5/00 , Kevin Baumgartner wrote:
> >That was what I though and I noticed it used in some of the cciebootcamp
> >router configurations. I questioned Marc Rusell why the "Source-bridge ring-
group"
> >was required for bridging ethernet but he never got back to me on this.
> >
> > Kevin
> >
> >At 09:42 AM 5/5/00 -0700, you wrote:
> >>You do not need the SOurce-bridge ring-group for bridging ethernet with
> >>DLSW.. It is an error or habit to put it in but, it will not impact
> >>it's`operation....
> >>
> >>John Conzone wrote:
> >> >
> >> > It works fine with SNA as well.
> >> > ----- Original Message -----
> >> > From: "Asbjorn Hojmark" <Asbjorn@Hojmark.ORG>
> >> > To: "'John Conzone'" <jkconzone@home.com>
> >> > Cc: "'Kinton Connelly'" <kinton@oldmedia.com>; "'Nnanna Obuba'"
> >> > <obuba@bellatlantic.net>; <ccielab@groupstudy.com>
> >> > Sent: Thursday, May 04, 2000 5:04 PM
> >> > Subject: RE: quick DLSW+ question
> >> >
> >> > >
> >> > > > I keep seeing the source-bridge ring-group statements on
> >> > > > these DLSW routers with no Token Ring, just Ethernet, and I
> >> > > > can't figure out why they are there.
> >> > >
> >> > > Same thing here. I don't get it.
> >> > >
> >> > > > I configured a bunch of DLSW routers with ethernet, and never
> >> > > > used that statement. Only on Token Ring peers.
> >> > >
> >> > > I tested it in the lab today and it does indeed work fine with-
> >> > > out 'source-bridge ring-group'. At least for NetBIOS, I didn't
> >> > > test SNA.
> >> > >
> >> > > CCO samples (http://www.cisco.com/warp/customer/697/3.html)
> >> > > doesn't use it whereas the DLSw configuration guide for 12.1
> >> > > does.
> >> > >
> >> > > -A
> >> > > --
> >> > > Heroes: Vint Cerf & Bob Kahn, Leonard Kleinrock, Robert Metcalfe
> >> > > Links : http://www.hojmark.org/networking/
> >> > >
> >> > >
> >> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:27 GMT-3