From: Lachberg (samlach@xxxxxxx)
Date: Fri May 05 2000 - 05:30:33 GMT-3
I noticed that as well, I thought that since the Ethernet dlsw statements
where between two tokenring statements, it required the source-bridge
ring-group statement for the token-to-ethernet-to-token connectivity. Just
what I thought, probably totally wrong.
Matthew Lachberg
----- Original Message -----
From: "Kevin Baumgartner" <kbaumgar@cisco.com>
To: "Michael Needham" <mineedha@cisco.com>
Cc: <ccielab@groupstudy.com>
Sent: Friday, May 05, 2000 11:36 AM
Subject: Re: quick DLSW+ question
> That was what I though and I noticed it used in some of the cciebootcamp
> router configurations. I questioned Marc Rusell why the "Source-bridge
ring-group"
> was required for bridging ethernet but he never got back to me on this.
>
> Kevin
>
> At 09:42 AM 5/5/00 -0700, you wrote:
> >You do not need the SOurce-bridge ring-group for bridging ethernet with
> >DLSW.. It is an error or habit to put it in but, it will not impact
> >it's`operation....
> >
> >John Conzone wrote:
> > >
> > > It works fine with SNA as well.
> > > ----- Original Message -----
> > > From: "Asbjorn Hojmark" <Asbjorn@Hojmark.ORG>
> > > To: "'John Conzone'" <jkconzone@home.com>
> > > Cc: "'Kinton Connelly'" <kinton@oldmedia.com>; "'Nnanna Obuba'"
> > > <obuba@bellatlantic.net>; <ccielab@groupstudy.com>
> > > Sent: Thursday, May 04, 2000 5:04 PM
> > > Subject: RE: quick DLSW+ question
> > >
> > > >
> > > > > I keep seeing the source-bridge ring-group statements on
> > > > > these DLSW routers with no Token Ring, just Ethernet, and I
> > > > > can't figure out why they are there.
> > > >
> > > > Same thing here. I don't get it.
> > > >
> > > > > I configured a bunch of DLSW routers with ethernet, and never
> > > > > used that statement. Only on Token Ring peers.
> > > >
> > > > I tested it in the lab today and it does indeed work fine with-
> > > > out 'source-bridge ring-group'. At least for NetBIOS, I didn't
> > > > test SNA.
> > > >
> > > > CCO samples (http://www.cisco.com/warp/customer/697/3.html)
> > > > doesn't use it whereas the DLSw configuration guide for 12.1
> > > > does.
> > > >
> > > > -A
> > > > --
> > > > Heroes: Vint Cerf & Bob Kahn, Leonard Kleinrock, Robert Metcalfe
> > > > Links : http://www.hojmark.org/networking/
> > > >
> > > >
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:27 GMT-3