From: Alejando Cadarso Cerdeiriņa (a.cadarso@xxxxxxxxxxxxxx)
Date: Sat May 06 2000 - 07:18:54 GMT-3
Of course, that was what I expected Dery but I haven't the command available,
and I found the reason, there are
different class of flash architectures:
http://127.0.0.1:8080/cc/td/doc/product/software/ios120/12cgcr/fun_c/fcprt2/fci
fs.htm#xtocid2858533
In order to reclaim any space taken up by files in Flash memory, you must erase
the entire file system using the
erase flash: or erase bootflash: commands.
Thanks anyway.
"DERY, FREDERIC" wrote:
> You use the command squeeze after you have deleted your files.
>
> Frederic Dery
>
> Dana_L_Steffey@notes.seagate.com wrote:
> >
> > Have you tried format flash:
> >
> > This is a total guess, but sometimes you have to reboot for deleted stuff
> > to completely disapear - i.e. deletion of sub-interfaces.
> >
> > What platform is this ?
> >
> > Dana Steffey, CCNP, CCDP, CCNA WAN Switching, MCSE, MCT, CNA, Electrical
> > Engineer
> > Lab: June 21st Halifax
> > Seagate Technology
> > Minneapolis, MN
> >
> > Alejando Cadarso Cerdeiriņa <a.cadarso@uniway-tec.com>@groupstudy.com on
> > 05/04/2000 01:29:10 PM
> >
> > Please respond to Alejando Cadarso Cerdeiriņa <a.cadarso@uniway-tec.com>
> >
> > Sent by: nobody@groupstudy.com
> >
> > To: ccielab <ccielab@groupstudy.com>
> > cc:
> >
> > Subject: Erasing files from flash SIMMS
> >
> > Hi,
> >
> > Somebody knows how can you erase the deleted files from the SIMM flash.
> > If you can't recover the deleted space, wich is the purpose of the delete
> > flash:<file> command?
> >
> > I know that in a PCMCIA card you can issue the squeeze command, What about
> > the simm flashes?
> >
> > Thanks
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:27 GMT-3