From: Joel W. Ekis (jekis@xxxxxxxxx)
Date: Thu Mar 02 2000 - 10:47:15 GMT-3
ip igmp join-group 239.0.5.10 on an interface.
ping 239.0.5.10 from another router.
sho ip mroute
mtrace ...
sho ip pim ...
Joel
At 10:02 AM 3/1/2000 -0600, Truman, Michelle, BNSVC wrote:
>Ok, I might have answered my own question. I turned up a /30 on the tunnel
>(10.1.1.1 at one end and 10.1.1.2 on the other). Then I added a static
>mroute to the tunnel destination (host route only) for each corresponding
>tunnel destination. Seems to have fixed the RPF check failures. Now, without
>a switch and without a multicast client, how do I verify that multicast is
>working properly? The join groups seem to be advertised properly, but I just
>don't know how to test if I have done this correctly.
>
>
>Michelle Truman, CCNP
>Internet Technologies Consultant-AT&T
>mtruman@att.com
>w 612-376-5137 vo 651-917-8104
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:03 GMT-3