From: Joel W. Ekis (jekis@xxxxxxxxx)
Date: Thu Mar 02 2000 - 10:43:52 GMT-3
The demand-circuit only prevents the LSA's from aging. It does not stop the he
llo's. You need to modify your dialer-list to deny ospf.
dialer-list 1 protocol ip list 101
access-list 101 deny ospf any any
access-list 101 permit ip any any
Joel
At 08:43 AM 3/1/2000 -0800, Rob Barton wrote:
>Hi all, I am new to this group and am already impressed with the high
>level of discussion that has been going on. I am scheduled to write the
>exam in San Jose on June 29,30
>
>I have an OSPF config problem maybe someone can help me with. OSPF is
>configured across my BRI line (not as a backup interface, but just with
>a higher cost than the serial interface). I have used the ip ospf
>demand-circuit command at both sides of the ISDN line, but the OSPF
>multicast traffic is still bringing up the line constantly. Any ideas
>of why this would be?
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:03 GMT-3