DLSW+ over ISDN

From: Chuah Eng Wee (chuahew@xxxxxxxxxxxxxxx)
Date: Sat Jul 24 1999 - 06:27:22 GMT-3

Next message: Hutchinson, Ian: "RCMD & RSH"
Previous message: Scott Morris: "RE: CCIE #4932"
Next in thread: Fred Ingham: "Re: DLSW+ over ISDN"
Maybe reply: Fred Ingham: "Re: DLSW+ over ISDN"
Maybe reply: Chuah Eng Wee: "Re: DLSW+ over ISDN"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

HI..

I have 2 routers across ISDN with DLSW config below.
How to prevent DLSW from triggering the ISDN line.
I use keepalive 0 at dlsw remote-peer command.
Keepalive is not sent, but

debug dialer packet shows
BRI0: ip (s=172.16.52.5, d=172.16.60.1), 181 bytes, interesting (ip PERMIT)

every minute which triggers the ISDN line. What else did I miss out ?

[r5]
dlsw local-peer peer-id 172.16.52.5
dlsw remote-peer 0 tcp 172.16.60.1 keepalive 0 timeout 200
[r6]
dlsw local-peer peer-id 172.16.60.1
dlsw remote-peer 0 tcp 172.16.52.5 keepalive 0 timeout 200

THanks
Eng Wee

Next message: Hutchinson, Ian: "RCMD & RSH"
Previous message: Scott Morris: "RE: CCIE #4932"
Next in thread: Fred Ingham: "Re: DLSW+ over ISDN"
Maybe reply: Fred Ingham: "Re: DLSW+ over ISDN"
Maybe reply: Chuah Eng Wee: "Re: DLSW+ over ISDN"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:42 GMT-3