From: Fred Ingham (fningham@xxxxxxxxxxxxxxxx)
Date: Sat Jul 24 1999 - 12:58:21 GMT-3
What routing protocol(s) are you using?
Chuah Eng Wee wrote:
>
> HI..
>
> I have 2 routers across ISDN with DLSW config below.
> How to prevent DLSW from triggering the ISDN line.
> I use keepalive 0 at dlsw remote-peer command.
> Keepalive is not sent, but
>
> debug dialer packet shows
> BRI0: ip (s=172.16.52.5, d=172.16.60.1), 181 bytes, interesting (ip PERMIT)
>
> every minute which triggers the ISDN line. What else did I miss out ?
>
> [r5]
> dlsw local-peer peer-id 172.16.52.5
> dlsw remote-peer 0 tcp 172.16.60.1 keepalive 0 timeout 200
> [r6]
> dlsw local-peer peer-id 172.16.60.1
> dlsw remote-peer 0 tcp 172.16.52.5 keepalive 0 timeout 200
>
> THanks
> Eng Wee
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:43 GMT-3