From: Chuah Eng Wee (chuahew@xxxxxxxxxxxxxxx)
Date: Sat Jul 24 1999 - 22:21:37 GMT-3
Hi Fred,
I am running rip together with snapshot routing and it seems to work
as expected. Will try to use a more restrictive dialer list
to blk port 2065 and 2067 to c if it works.
Thanks
Eng Wee
At 11:58 24/07/99 -0400, Fred Ingham wrote:
>What routing protocol(s) are you using?
>
>Chuah Eng Wee wrote:
>>
>> HI..
>>
>> I have 2 routers across ISDN with DLSW config below.
>> How to prevent DLSW from triggering the ISDN line.
>> I use keepalive 0 at dlsw remote-peer command.
>> Keepalive is not sent, but
>>
>> debug dialer packet shows
>> BRI0: ip (s=172.16.52.5, d=172.16.60.1), 181 bytes, interesting (ip PERMIT)
>>
>> every minute which triggers the ISDN line. What else did I miss out ?
>>
>> [r5]
>> dlsw local-peer peer-id 172.16.52.5
>> dlsw remote-peer 0 tcp 172.16.60.1 keepalive 0 timeout 200
>> [r6]
>> dlsw local-peer peer-id 172.16.60.1
>> dlsw remote-peer 0 tcp 172.16.52.5 keepalive 0 timeout 200
>>
>> THanks
>> Eng Wee
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:43 GMT-3