Re: OT: Direct telnet access to Router IOU VM

Juan,

You will probably need to route it properly for you to reach that IP
segment. My IOU is on a esxi box but I tested it on workstation and if the
IP is on same LAN, it works.

On Mon, Oct 20, 2014 at 3:56 AM, Imran Ali <immrccie_at_gmail.com> wrote:

> You can telnet to any ip as long as u have reachability ....telnet
> port open on destination ....and firewall in transit allowing
> access
> On Oct 19, 2014 11:42 AM, "Juan Faure" <fferrer10_at_gmail.com> wrote:
>
>> Oops ! You are right, tried with other pc and telnet to Switches & Routers
>> of IOU vm works fine....
>>
>> Is it possible to telnet from a PC on an IP network routed with the Lan
>> where IOU is? Or the only way to access this way is for pcs on same Lan
>> than IOU?
>>
>> Best Regards
>>
>> 2014-10-19 7:11 GMT+02:00 Juan Faure <fferrer10_at_gmail.com>:
>>
>> > Hi,
>> >
>> > Thanks Haroon, i though somethingh like that. In fact, IOU nic
>> interfaces
>> > are on "bridged" mode... but i tried to telnet using port
>> > "2000+iou_device_number", from a different pc that pc that has IOU, and
>> no
>> > luck..
>> >
>> > Maybe something relating Windows Firewall ? Or need to configure
>> > something more on IOU PC? From IOU pc, if i try to connect using this
>> type
>> > of telnet, then it works fine... it is the only pc of the lan that can
>> be
>> > do it. Rest of pcs have IP connectivity with IOU VM, but telnet to
>> > it, using port associated with iou networking elements, does not work
>> >
>> > Regards
>> >
>> > 2014-10-19 3:26 GMT+02:00 Haroon <itguy.pro_at_gmail.com>:
>> >
>> >> So, I assume its Vmware workstation, etc. make sure the IOU VM has the
>> >> networkign set to "bridged" so it should have same IP address as the
>> rest
>> >> of the LAN.
>> >>
>> >> Once you do that, start your devices and you can connect to the lab
>> >> using: ip address:portNumber so R1 would be 192.168.1.10:2001
>> >>
>> >> On Sat, Oct 18, 2014 at 10:12 AM, Juan Faure <fferrer10_at_gmail.com>
>> wrote:
>> >>
>> >>> Running on a separate windows PC
>> >>>
>> >>> Regards
>> >>>
>> >>> 2014-10-18 16:09 GMT+02:00 Haroon <itguy.pro_at_gmail.com>:
>> >>>
>> >>>> Where is the iou? Workstation or dedicated esx host?
>> >>>> On Oct 18, 2014 9:05 AM, "Juan Faure" <fferrer10_at_gmail.com> wrote:
>> >>>>
>> >>>>> Hi Guys,
>> >>>>>
>> >>>>> Trying to deploy a networking scenario with several Cisco Routers &
>> >>>>> Switches, using IOU virtual Machine... I would like to share it with
>> >>>>> another PCs, and I have hear that can do this associating a TCP
>> port to
>> >>>>> each Router of Switch of IOU VM...
>> >>>>>
>> >>>>> Please, do you know how to configure IOU for this? Any url or
>> reference
>> >>>>> guide will be well suited
>> >>>>>
>> >>>>> TIA & best regards
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> --
>> >>>>> Juan Faure
>> >>>>>
>> >>>>>
>> >>>>> Blogs and organic groups at http://www.ccie.net
>> >>>>>
>> >>>>>
>> _______________________________________________________________________
>> >>>>> Subscription information may be found at:
>> >>>>> http://www.groupstudy.com/list/CCIELab.html
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>
>> >>>
>> >>> --
>> >>> Juan Faure
>> >>>
>> >>
>> >>
>> >>
>> >> --
>> >> *Virtualization.net*
>> >> *Post Jobs, News, Forums, Tutorials*
>> >> http://www.virtualization.net
>> >>
>> >
>> >
>> >
>> > --
>> > Juan Faure
>> >
>>
>>
>>
>> --
>> Juan Faure
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>

-- 
*Virtualization.net*
*Post Jobs, News, Forums, Tutorials*
http://www.virtualization.net
Blogs and organic groups at http://www.ccie.net