Re: OT: Direct telnet access to Router IOU VM

You can telnet to any ip as long as u have reachability ....telnet
port open on destination ....and firewall in transit allowing
access
On Oct 19, 2014 11:42 AM, "Juan Faure" <fferrer10_at_gmail.com> wrote:

> Oops ! You are right, tried with other pc and telnet to Switches & Routers
> of IOU vm works fine....
>
> Is it possible to telnet from a PC on an IP network routed with the Lan
> where IOU is? Or the only way to access this way is for pcs on same Lan
> than IOU?
>
> Best Regards
>
> 2014-10-19 7:11 GMT+02:00 Juan Faure <fferrer10_at_gmail.com>:
>
> > Hi,
> >
> > Thanks Haroon, i though somethingh like that. In fact, IOU nic interfaces
> > are on "bridged" mode... but i tried to telnet using port
> > "2000+iou_device_number", from a different pc that pc that has IOU, and
> no
> > luck..
> >
> > Maybe something relating Windows Firewall ? Or need to configure
> > something more on IOU PC? From IOU pc, if i try to connect using this
> type
> > of telnet, then it works fine... it is the only pc of the lan that can be
> > do it. Rest of pcs have IP connectivity with IOU VM, but telnet to
> > it, using port associated with iou networking elements, does not work
> >
> > Regards
> >
> > 2014-10-19 3:26 GMT+02:00 Haroon <itguy.pro_at_gmail.com>:
> >
> >> So, I assume its Vmware workstation, etc. make sure the IOU VM has the
> >> networkign set to "bridged" so it should have same IP address as the
> rest
> >> of the LAN.
> >>
> >> Once you do that, start your devices and you can connect to the lab
> >> using: ip address:portNumber so R1 would be 192.168.1.10:2001
> >>
> >> On Sat, Oct 18, 2014 at 10:12 AM, Juan Faure <fferrer10_at_gmail.com>
> wrote:
> >>
> >>> Running on a separate windows PC
> >>>
> >>> Regards
> >>>
> >>> 2014-10-18 16:09 GMT+02:00 Haroon <itguy.pro_at_gmail.com>:
> >>>
> >>>> Where is the iou? Workstation or dedicated esx host?
> >>>> On Oct 18, 2014 9:05 AM, "Juan Faure" <fferrer10_at_gmail.com> wrote:
> >>>>
> >>>>> Hi Guys,
> >>>>>
> >>>>> Trying to deploy a networking scenario with several Cisco Routers &
> >>>>> Switches, using IOU virtual Machine... I would like to share it with
> >>>>> another PCs, and I have hear that can do this associating a TCP port
> to
> >>>>> each Router of Switch of IOU VM...
> >>>>>
> >>>>> Please, do you know how to configure IOU for this? Any url or
> reference
> >>>>> guide will be well suited
> >>>>>
> >>>>> TIA & best regards
> >>>>>
> >>>>>
> >>>>>
> >>>>> --
> >>>>> Juan Faure
> >>>>>
> >>>>>
> >>>>> Blogs and organic groups at http://www.ccie.net
> >>>>>
> >>>>>
> _______________________________________________________________________
> >>>>> Subscription information may be found at:
> >>>>> http://www.groupstudy.com/list/CCIELab.html
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>
> >>>
> >>> --
> >>> Juan Faure
> >>>
> >>
> >>
> >>
> >> --
> >> *Virtualization.net*
> >> *Post Jobs, News, Forums, Tutorials*
> >> http://www.virtualization.net
> >>
> >
> >
> >
> > --
> > Juan Faure
> >
>
>
>
> --
> Juan Faure
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Oct 20 2014 - 10:56:34 ART