show cef vrf A unresolved --Layer 2 broken OSPF as PE-CE

Hello Experts,

I am scratching my head almost for 2hrs and I could not able to figured it
out yet.

Please let me know if any one would be able to figure out.

I am running MP-BGP over an MPLS clous with RSVP.

One side PE is IOS-XR and other end is Junos.

OSPF with domain ID 1 is running as PE-CE routing protocol:
 The control plan works perfectly. I am able to see routes from other CE
but
the DATA plan is broke on IOS-XR PE

RP/0/0/CPU0:PE1#*show cef vrf A unresolved *
Thu Jul 3 01:40:11.628 UTC

VRF: A

Prefix Next Hop Interface
9.9.9.9/32 10.1.1.10 (?) <recursive>
192.168.10.0/24 10.1.1.10 (?) <recursive>

----------------------------------------------------------------------

CE1#show ip route ospf
O E2 192.168.10.0/24 [110/1] via 192.168.1.1, 05:10:13, FastEthernet0/0.10
     9.0.0.0/32 is subnetted, 1 subnets
O IA 9.9.9.9 [110/3] via 192.168.1.1, 05:10:18, FastEthernet0/0.10

CE2#show ip route ospf
     6.0.0.0/32 is subnetted, 1 subnets
O IA 6.6.6.6 [110/3] via 192.168.10.10, 00:31:16, FastEthernet0/0
     11.0.0.0/32 is subnetted, 1 subnets

Can anyone guess why the prefix originated by CE and advertising by Juniper
(PE) is unresolved on IOS-XR PE ?

Juniper Config :

root_at_PE10# run show configuration protocols | display set
set protocols rsvp node-hello hello-interval 0
set protocols rsvp interface em2.0 hello-interval 0
set protocols rsvp interface em3.0 hello-interval 0
set protocols rsvp interface lo0.0
set protocols mpls no-cspf
set protocols mpls label-switched-path PE1 from 10.10.10.10
set protocols mpls label-switched-path PE1 to 1.1.1.1
set protocols mpls label-switched-path PE1 install 11.1.1.1/32
set protocols mpls path EXCLU-R5
set protocols mpls path EXCLU-R4
set protocols mpls interface all
set protocols bgp export OSPF-TO-BGP
set protocols bgp group IBGP local-address 10.1.1.10
set protocols bgp group IBGP family inet-vpn unicast
set protocols bgp group IBGP peer-as 100
set protocols bgp group IBGP as-override
set protocols bgp group IBGP neighbor 11.1.1.1
set protocols isis level 1 disable
set protocols isis interface all
set protocols isis interface em2.0 point-to-point
set protocols isis interface em3.0 point-to-point
set protocols isis interface lo0.0 passive

Regards,
Kumar S

Blogs and organic groups at http://www.ccie.net
Received on Thu Jul 03 2014 - 17:24:00 ART