Re: show cef vrf A unresolved --Layer 2 broken OSPF as PE-CE

For the VRF A routes on PE1 XR

"Show BGP vpnv4 unicast labels" check you have a VPNv4 label assigned by the Junos PE10

"Show MPLS forwarding" Check you have transport labels assigned by RSVP for 10.10.10.10/32

--
BR
Tony
> On 4 Jul 2014, at 01:24, kumar yes <2014ccie_at_gmail.com> wrote:
> 
> Hello Experts,
> 
> I am scratching my head almost for 2hrs and I could not able to figured it
> out yet.
> 
> Please let me know if any one would be able to figure out.
> 
> I am running MP-BGP over an MPLS clous with RSVP.
> 
> One side PE is IOS-XR and other end is Junos.
> 
> OSPF with domain ID 1 is running as PE-CE routing protocol:
> The control plan works perfectly. I am able to see routes from other CE
> but
> the DATA plan is broke on IOS-XR PE
> 
> 
> RP/0/0/CPU0:PE1#*show cef vrf A unresolved  *
> Thu Jul  3 01:40:11.628 UTC
> 
> VRF: A
> 
> Prefix              Next Hop            Interface
> 9.9.9.9/32          10.1.1.10 (?)       <recursive>
> 192.168.10.0/24     10.1.1.10 (?)       <recursive>
> 
> 
> ----------------------------------------------------------------------
> 
> CE1#show ip route ospf
> O E2 192.168.10.0/24 [110/1] via 192.168.1.1, 05:10:13, FastEthernet0/0.10
>     9.0.0.0/32 is subnetted, 1 subnets
> O IA    9.9.9.9 [110/3] via 192.168.1.1, 05:10:18, FastEthernet0/0.10
> 
> 
> CE2#show ip route ospf
>     6.0.0.0/32 is subnetted, 1 subnets
> O IA    6.6.6.6 [110/3] via 192.168.10.10, 00:31:16, FastEthernet0/0
>     11.0.0.0/32 is subnetted, 1 subnets
> 
> Can anyone guess why the prefix originated by CE and advertising by Juniper
> (PE) is unresolved on IOS-XR PE ?
> 
> Juniper Config :
> 
> root_at_PE10# run show configuration protocols | display set
> set protocols rsvp node-hello hello-interval 0
> set protocols rsvp interface em2.0 hello-interval 0
> set protocols rsvp interface em3.0 hello-interval 0
> set protocols rsvp interface lo0.0
> set protocols mpls no-cspf
> set protocols mpls label-switched-path PE1 from 10.10.10.10
> set protocols mpls label-switched-path PE1 to 1.1.1.1
> set protocols mpls label-switched-path PE1 install 11.1.1.1/32
> set protocols mpls path EXCLU-R5
> set protocols mpls path EXCLU-R4
> set protocols mpls interface all
> set protocols bgp export OSPF-TO-BGP
> set protocols bgp group IBGP local-address 10.1.1.10
> set protocols bgp group IBGP family inet-vpn unicast
> set protocols bgp group IBGP peer-as 100
> set protocols bgp group IBGP as-override
> set protocols bgp group IBGP neighbor 11.1.1.1
> set protocols isis level 1 disable
> set protocols isis interface all
> set protocols isis interface em2.0 point-to-point
> set protocols isis interface em3.0 point-to-point
> set protocols isis interface lo0.0 passive
> 
> Regards,
> Kumar S
> 
> 
> Blogs and organic groups at http://www.ccie.net
> 
> _______________________________________________________________________
> Subscription information may be found at: 
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net