Re: 2511 Router

Hi Davito,

It can be done with a 2511 without drama. You configure the 2511 for
reverse telnet like you would if you were to establish individual sessions

e.g.

ip host R1 2001 10.1.1.1
ip host R2 2002 10.1.1.1
ip host R3 2003 10.1.1.1

line 1 16
  no exec
  transport input all

then when you ssh/telnet to the 2511 to access the first device type "R1"
then get back to the 2511 command prompt by typing control shift 6 X (that
is hold control, then shift)
You can then type "R2" to access R2

When you want to get back to R1 after you had opened the session but are
currently somewhere else you can type "resume R1"

Use the "Show line" for active sessions and "Clear line x" to kill that
session if you need to..

Cheers,
Adam

Blogs and organic groups at http://www.ccie.net
Received on Sun Jun 02 2013 - 09:43:21 ART