Re: 2511 Router

To clarify, I think what you actually want is 8 separate session. Most of us use a single application (SecureCrt) with 8 tabs.

If you want a single TCP session to the access router, you can do that and flip back and forth between devices. However, this is not recommended.

Regards,
Jay McMickle- 2x CCIE #35355 (R/S,Sec)
Sent from my iPhone 5

On Jun 1, 2013, at 6:29 PM, CCIEDAVITO CCIEDAVITO <cciedavito_at_gmail.com> wrote:

> I own a 2511 router, using an octal cable connection to console port of 8
> devices, I telnet remotely to the Access router (2511) I would like
> to establish connection to all 8 devices via the access server, with
> single telnet session and not a 8 separate telnet sessions from remote site
> to 2511. all sessions to be active while doing labs.
>
> 1:is this possible
> 2: if yes, where do I get the documentation
> 3: or I need to get a NM 16
>
> appreciate any help
>
> Thanks
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Jun 01 2013 - 18:48:13 ART