RE: show run "no auto-summary" command

Thanks Brian!
I am not trying to memorize the default options but I am trying to understand
how can I test this in real scenario if I don't see the command in "show run"
and proof that the functionlity is working. I landed into this issue :)
-Yuri

> From: bmcgahan_at_ine.com
> To: bmcgahan_at_ine.com; ebay_products_at_hotmail.com
> CC: ccielab_at_groupstudy.com
> Date: Fri, 31 May 2013 18:56:12 -0500
> Subject: RE: show run "no auto-summary" command
>
> The same is true for synchronization in BGP:
>
> R2#show ip protocols | section bgp
> Routing Protocol is "bgp 248"
> Outgoing update filter list for all interfaces is not set
> Incoming update filter list for all interfaces is not set
> IGP synchronization is disabled
> Automatic route summarization is disabled
> Neighbor(s):
> Address FiltIn FiltOut DistIn DistOut Weight RouteMap
> 46.0.0.8
> 169.254.129.19
> Maximum path: 1
> Routing Information Sources:
> Gateway Distance Last Update
> 46.0.0.8 200 00:08:34
> Distance: external 20 internal 200 local 200
>
> Don't try to memorize default options in the code, it's a waste of time
since it changes between releases. Instead learn how to verify the state of
the network from commands other than "show run". This will also help you
extend your knowledge between platforms, e.g. from IOS to IOS XR, NX-OS, ASA,
etc. If you want to know the default option of a command just check the
command reference for that particular version and it'll tell you what the
default is.
>
>
>
> Brian McGahan, CCIE #8593 (R&S/SP/Security), CCDE #2013::13
> bmcgahan_at_INE.com
>
> Internetwork Expert, Inc.
> http://www.INE.com
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Brian McGahan
> Sent: Friday, May 31, 2013 6:51 PM
> To: Cisco Fanatic
> Cc: ccielab_at_groupstudy.com
> Subject: RE: show run "no auto-summary" command
>
> R1#show ip protocols | include Routing Protocol|(S|s)ummarization Routing
Protocol is "bgp 248"
> Automatic route summarization is disabled Routing Protocol is "eigrp 1"
> Automatic Summarization: disabled
>
>
>
> HTH,
>
> Brian McGahan, CCIE #8593 (R&S/SP/Security), CCDE #2013::13
bmcgahan_at_INE.com
>
> Internetwork Expert, Inc.
> http://www.INE.com
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Cisco Fanatic
> Sent: Friday, May 31, 2013 6:40 PM
> To: Narbik Kocharians
> Cc: ccielab_at_groupstudy.com
> Subject: RE: show run "no auto-summary" command
>
> ALL -
> OK, I get that and understand that it's behavior change in 15 code and
"auto-summary" and "synchronization" is not showing in the running config.
> But, nobody in this forum has provided a solution or said how I can check if
the "auto-summary" and "synchronization" is working as expected.
> Yuri
>
>
>
> > Date: Fri, 31 May 2013 11:44:24 -0700
> > Subject: Re: show run "no auto-summary" command
> > From: narbikk_at_gmail.com
> > To: ebay_products_at_hotmail.com
> > CC: ccielab_at_groupstudy.com
> >
> > I guess different versions of 15 code have different behaviors,
> > because I can see and change it with no problems, here:
> >
> > R1#Show run | s router bgp
> > router bgp 100
> > no synchronization
> > bgp log-neighbor-changes
> > neighbor 13.1.1.3 remote-as 100
> > no auto-summary
> >
> > R1(config)#router bgp 100
> > R1(config-router)#No aut
> > R1(config-router)#No auto-summary
> >
> > System image file is "flash:c1841-adventerprisek9-mz.151-1.T2.bin"
> >
> > So the default has changed but you can still change it if you like.
> >
> >
> > On Tue, May 28, 2013 at 6:57 AM, Cisco Fanatic
> <ebay_products_at_hotmail.com>wrote:
> >
> > > I downloaded IOS 152-3.T3 version and I see that I can't configure
> > > "no auto-summary" command under eigrp and bgp?
> > >
> > > I can't see the "no sync" command under bgp? Can someone let me know
why?
> > >
> > > !
> > > router eigrp 1000
> > > network 10.0.0.0
> > > !
> > > router bgp 64501
> > > bgp log-neighbor-changes
> > > neighbor 11.255.255.1 remote-as 200 !
> > >
> > > Yuri
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > > ____________________________________________________________________
> > > ___ Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> > --
> > *Narbik Kocharians
> > *CCSI#30832, CCIE# 12410 (R&S, SP, Security)
> > *www.MicronicsTraining.com* <http://www.micronicstraining.com/>
> > Sr. Technical Instructor
> > YES! We take Cisco Learning Credits!
> > A Cisco Learning Partner
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > ______________________________________________________________________
> > _ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri May 31 2013 - 19:18:35 ART