Re: Multicast VPN

That is unreadable.

On Sun, Feb 10, 2013 at 1:32 PM, Mohammad Khalil <eng_mssk_at_hotmail.com>wrote:

> Hi allI have the below topology R1 -- R2 -- R3 -- R4 -- R5R2 and R4 are my
> PE routers , I am trying to implement multicast VPN , please find
> belowR1#sh run int f1/0Building configuration...Current configuration : 114
> bytes!interface FastEthernet1/0 ip address 192.1.12.1 255.255.255.0 speed
> 100 duplex fullendR1#sh run | inc ip routeip route 0.0.0.0 0.0.0.0
> 192.1.12.2R2#sh run int f1/0Building configuration...Current configuration
> : 136 bytes!interface FastEthernet1/0 vrf forwarding VPN_A ip address
> 192.1.12.2 255.255.255.0 ip pim sparse-mode speed 100 duplex fullendR2#sh
> run int f1/1Building configuration...Current configuration : 123
> bytes!interface FastEthernet1/1 ip address 192.1.23.2 255.255.255.0 ip pim
> sparse-mode speed 100 duplex full mpls ipendR2#sh run int lo0Building
> configuration...Current configuration : 83 bytes!interface Loopback0 ip
> address 2.2.2.2 255.255.255.255 ip pim sparse-modeendR2#sh run | sec router
> bgprouter bgp 100 bgp log-neighbor-changes no bgp defa!
> ult ipv4-unicast neighbor 4.4.4.4 remote-as 100 neighbor 4.4.4.4
> update-source Loopback0 ! address-family ipv4 exit-address-family !
> address-family vpnv4 neighbor 4.4.4.4 activate neighbor 4.4.4.4
> send-community both exit-address-family ! address-family ipv4 mdt neighbor
> 4.4.4.4 activate neighbor 4.4.4.4 send-community both exit-address-family
> ! address-family ipv4 vrf VPN_A network 192.1.12.0
> exit-address-familyR2#sh run | sec router ospfrouter ospf 1 router-id
> 2.2.2.2 network 2.2.2.2 0.0.0.0 area 0 network 192.1.23.2 0.0.0.0 area
> 0R2#sh run | inc multiip multicast-routing ip multicast-routing vrf VPN_A
> R3#sh run int f1/0Building configuration...Current configuration : 123
> bytes!interface FastEthernet1/0 ip address 192.1.23.3 255.255.255.0 ip pim
> sparse-mode speed 100 duplex full mpls ipendR3#sh run int f1/1Building
> configuration...Current configuration : 123 bytes!interface FastEthernet1/1
> ip address 192.1.34.3 255.255.255.0 ip pim sparse-mode speed 100 duplex
> full m!
> pls ipendR3#sh run int lo0 Building configuration...Current co!
> nfigurat
>
> ion : 63 bytes!interface Loopback0 ip address 3.3.3.3
> 255.255.255.255endR3#sh run | sec router ospf router ospf 1 router-id
> 3.3.3.3 network 3.3.3.3 0.0.0.0 area 0 network 192.1.23.3 0.0.0.0 area 0
> network 192.1.34.3 0.0.0.0 area 0R3#sh run | inc multicip multicast-routing
> R4#sh run int f1/0Building configuration...Current configuration : 123
> bytes!interface FastEthernet1/0 ip address 192.1.34.4 255.255.255.0 ip pim
> sparse-mode speed 100 duplex full mpls ipendR4#sh run int f1/1Building
> configuration...Current configuration : 136 bytes!interface FastEthernet1/1
> vrf forwarding VPN_A ip address 192.1.45.4 255.255.255.0 ip pim sparse-mode
> speed 100 duplex fullendR4#sh run int lo0 Building configuration...Current
> configuration : 113 bytes!interface Loopback0 ip address 4.4.4.4
> 255.255.255.255 ip pim sparse-mode ip igmp join-group 234.4.4.4endR4#sh run
> | sec router ospfrouter ospf 1 router-id 4.4.4.4 network 4.4.4.4 0.0.0.0
> area 0 network 192.1.34.4 0.0.0.0 area 0R4#sh run | sec ro!
> uter bgp router bgp 100 bgp log-neighbor-changes no bgp default
> ipv4-unicast neighbor 2.2.2.2 remote-as 100 neighbor 2.2.2.2 update-source
> Loopback0 ! address-family ipv4 exit-address-family ! address-family vpnv4
> neighbor 2.2.2.2 activate neighbor 2.2.2.2 send-community both
> exit-address-family ! address-family ipv4 mdt neighbor 2.2.2.2 activate
> neighbor 2.2.2.2 send-community both exit-address-family ! address-family
> ipv4 vrf VPN_A network 192.1.45.0 exit-address-familyR4#sh run | inc
> multiip multicast-routing ip multicast-routing vrf VPN_A R4#sh run | sec
> vrf defvrf definition VPN_A rd 100:1 route-target export 100:1 route-target
> import 100:1 ! address-family ipv4 mdt default 232.0.0.1 mdt data
> 232.0.1.0 0.0.0.255 exit-address-familyR5#sh run int f1/0Building
> configuration...Current configuration : 144 bytes!interface FastEthernet1/0
> ip address 192.1.45.5 255.255.255.0 ip pim sparse-mode ip igmp join-group
> 235.5.5.5 speed 100 duplex fullendR5#sh run | inc ip route!
> ip route 0.0.0.0 0.0.0.0 192.1.45.4R1#ping 192.1.45.5 sou f1/0!
> Type esc
>
> ape sequence to abort.Sending 5, 100-byte ICMP Echos to 192.1.45.5,
> timeout is 2 seconds:Packet sent with a source address of 192.1.12.1
> !!!!!Success rate is 100 percent (5/5), round-trip min/avg/max = 16/18/28
> msR2#sh bgp ipv4 mdt all summary BGP router identifier 2.2.2.2, local AS
> number 100BGP table version is 3, main routing table version 32 network
> entries using 320 bytes of memory2 path entries using 168 bytes of
> memory2/2 BGP path/bestpath attribute entries using 272 bytes of memory1
> BGP extended community entries using 24 bytes of memory0 BGP route-map
> cache entries using 0 bytes of memory0 BGP filter-list cache entries using
> 0 bytes of memoryBGP using 784 total bytes of memoryBGP activity 4/0
> prefixes, 6/2 paths, scan interval 60 secsNeighbor V AS
> MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd4.4.4.4 4
> 100 26 26 3 0 0 00:16:08 1R2#sh bgp
> ipv4 mdt all BGP table version is 3, local route!
> r ID is 2.2.2.2Status codes: s suppressed, d damped, h history, * valid,
> > best, i - internal, r RIB-failure, S Stale, m multipath, b
> backup-path, f RT-Filter, x best-external, a additional-path,
> c RIB-compressed, Origin codes: i - IGP, e - EGP, ? - incompleteRPKI
> validation codes: V valid, I invalid, N Not found Network Next
> Hop Metric LocPrf Weight PathRoute Distinguisher: 100:1 (default
> for vrf VPN_A) *> 2.2.2.2/32 0.0.0.0
> 0 ? *>i 4.4.4.4/32 4.4.4.4 0 100 0 ?But i
> am not able to ping the group joined on R5 F1/0R1#ping 235.5.5.5 repeat
> 1Type escape sequence to abort.Sending 1, 100-byte ICMP Echos to 235.5.5.5,
> timeout is 2 seconds:.Thanks
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Marc Abel
CCIE #35470
(Routing and Switching)
Blogs and organic groups at http://www.ccie.net