RE: KEY-SYSTEM CONFIGURATION ON CME

Create a pilot

Assign the external DN number to the pilot

Add the pilot to all the destination ephones...

Need a config?

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of rufai michael
Sent: Thursday, February 07, 2013 4:00 AM
To: Cisco certification
Subject: OT: KEY-SYSTEM CONFIGURATION ON CME

I have a requirement to configure a key-system type of configuration on a cisco 2801 cme router. Now i have a telco line 012701061 which is currently connected to an analog phone. I want to connect this telephone line to my CME router so external calls from outside can ring the receptionist Cisco IP Phone as well as allow access to some users on their IP Phone to be able to dial out, But seems not to be able to get around configuring this, read through cisco documentation on configuring this but still not getting any success. Tried making an external call to the PSTN number and it rings on the phone i am using but doesnt ring at all on the Cisco IP Phone which i configured for the PSTN Line. Here's is my configuration:-

voice class custom-cptone NG_customtone
dualtone disconnect
  frequency 400 450
  cadence 200 400
!

voice-card 0
 dsp services dspfarm
 no local-bypass

application
  service queue flash:app-b-acd-aa-2.1.0.0.tcl
  param queue-len 15
  param aa-hunt10 102
  param number-of-hunt-grps 2
  param aa-hunt2 222
  param queue-manager-debugs 1
  !
  service aa flash:app-b-acd-aa-2.1.0.0.tcl
  paramspace english index 1
  param number-of-hunt-grps 2
  param handoff-string aa
  param dial-by-extension-option 1
paramspace english language en
  param max-time-vm-retry 2
  param aa-pilot 012701061
  param max-extension-length 3
  paramspace english location flash:
  param second-greeting-time 60
  param welcome-prompt _en_bacd_welcome.au
  param call-retry-timer 15
  param voice-mail 111
  param max-time-call-retry 60
  param service-name queue
 !
dial-control-mib retain-timer 35791
dial-control-mib max-size 1200
!
voice-port 0/0/1
 timeouts interdigit 5
 timeouts call-disconnect 30
 timeouts ringing 30
 connection plar opx 012701061------------------------------------TELEPHONE LINE description Trunk 50 caller-id enable

dspfarm profile 1 transcode
 codec g711ulaw
 codec g711alaw
 codec g729ar8
 codec g729abr8
 codec gsmamr-nb
 codec g729br8
 codec g729r8
 maximum sessions 2
 associate application SCCP
 shutdown

dial-peer voice 30 pots
 description Trunk 50
 destination-pattern 9T
 port 0/0/1
 forward-digits all

telephony-service
 sdspfarm units 1
 sdspfarm transcode sessions 2
 fxo hook-flash
  ip source-address 192.168.100.1 port 2000 voicemail 111 max-conferences 4 gain -6 hunt-group logout HLog moh music-on-hold.au transfer-system full-consult transfer-pattern 100 blind secondary-dialtone 9 create cnf-files version-stamp 7960

ephone-dn 1 dual-line----------------------------------------------------------Receptionist
DN
 number 102
 name Reception
 call-forward busy 111
 call-forward noan 111 timeout 10

ephone-dn 50
 number 012701061------------------------------------------------TELEPHONE LINE trunk 50 monitor-port 0/0/1 !
ephone 4-------------------------------------------------------------------RECEPTIONIST
PHONE
 mac-address 001C.5856.F919
 type 7911
 button 1:1
 button 2:50

***also tried changing the destination pattern to this 90[2-9]T 90[78][01]T

Blogs and organic groups at http://www.ccie.net
Received on Thu Feb 07 2013 - 09:05:51 ART