RE: Cisco AP flashing (light green/green/red) ??

Dear Charlie,
Check the below installation document for CAP3500 series AP. Below is the
point you are more interested in.

http://www.cisco.com/en/US/docs/wireless/access_point/3500/quick/guide/ap3500
getstart.html

As the access point attempts to connect to the controller, the LEDs cycle
through a green, red, and amber sequence, which can take up to 5 minutes.

Note If the access point remains in this mode for more than five minutes, the
access point is unable to find the Master Cisco wireless LAN controller. Check
the connection between the access point and the Cisco wireless LAN controller
and be sure that they are on the same subnet.

Regards
Akhilesh

> From: spycharlies_at_gmail.com
> Date: Mon, 26 Nov 2012 09:02:42 -0700
> Subject: Cisco AP flashing (light green/green/red) ??
> To: ccielab_at_groupstudy.com
>
> Hello Gurus..
>
> My technical abilities with regards to Wireless are very limited. Am
> currently troubleshooting an issue, where my new AP (air-cap36021-a-k9) is
> flashing "light green - dark green - red".
>
> I have more than 12 other AP's(AIR-CAP3502I-A-K9) which are working just
> fine, and just recently added this new 36021. Am currently scanning thru
> google and cisco documentation to see if this issue have been documented
> before.
>
> My WLC version is 7.0.116.0. Not sure if i need to upgrade my WLC codes..am
> still researching...Any suggestions, links would be appreciated.
>
> Thanks,
>
> Charlie
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Nov 27 2012 - 05:08:58 ART