Translation-rule problem

I have the Following topology for 2 CUCME

phone_1111 Phone_3333
                   | ---R1 ------------------------------R2 ---|
Phone_1112 Phone_3334

I configured R1 so that when Phone_1111 dials 3333 or 3334 numbers the a translation rule converts it to 55553333 or 55553334
and send it to R2 then the translation rule on R2 convert the 55553333 or 55553334 to 3333 or 3334 but it always gives me busy

I think there is something wrong in the config below , (Sorry I am not expert in the voice )

R1
==
translation-rule 1
 Rule 1 ^3 55553

dial-peer voice 2 voip
 destination-pattern 3...
 translate-outgoing called 1
 session target ipv4:172.16.200.2
!
dial-peer voice 5555 voip
 destination-pattern 55553...
 session target ipv4:172.16.200.2

R2
===
translation-rule 3334
 Rule 1 ^55553 3

dial-peer voice 1 voip
 destination-pattern 1...
 session target ipv4:172.16.200.1
!
dial-peer voice 3334 voip
 destination-pattern 3...
 translate-outgoing called 3334
 incoming called-number .

Blogs and organic groups at http://www.ccie.net
Received on Fri Apr 06 2012 - 04:33:13 ART