RE: Translation-rule problem

Hi ryan,
Sorry, it works only with your solution (translation-profile) not with the old translation-rule 3334
I don't really know the reason

From: go_soon2010_at_hotmail.com
To: rwest_at_zyedge.com; ccielab_at_groupstudy.com
Subject: RE: Translation-rule problem
Date: Fri, 6 Apr 2012 05:44:34 +0300

Hi Ryan,
It works now when I put the command translate-outgoing called 3334 under dial-peer voice 1 voip
I don't know why .
Thank you very much
From: rwest_at_zyedge.com
To: go_soon2010_at_hotmail.com; ccielab_at_groupstudy.com
Subject: RE: Translation-rule problem
Date: Fri, 6 Apr 2012 02:18:13 +0000

Did you try applying the voice translation-profile to your dial-peer on R2?
 

From: Iam Here [mailto:go_soon2010_at_hotmail.com]

Sent: Thursday, April 05, 2012 10:16 PM

To: Ryan West; ccielab_at_groupstudy.com

Subject: RE: Translation-rule problem

Thanks Ryan , I used test translation-rule command too and it works fine but when I try to call from Phone_1111 it gives busy tone I think there's
 something wrong in my config

You are right , I am trying to simulate the example but I don't have FXO and i will apply that config at the Customer later

> From:
rwest_at_zyedge.com

> To: go_soon2010_at_hotmail.com;
ccielab_at_groupstudy.com

> Subject: RE: Translation-rule problem

> Date: Fri, 6 Apr 2012 01:59:56 +0000

>

> Hello,

>

> I think you're working off examples that are designed for POTS failover, but you're attempting to get it working for VoIP only.

>

>
http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/dial_peer/dp_app_a.html

>

> You'll have much more flexibility using voice translation-rules and profiles. They can be applied inbound and outbound. I'm not very fluent with num-exp, but I think you could accomplish your goal using that as well. Using the logic you have below, here's
 what I would use on R2. You can apply similar logic to R1.

>

> voice translation-rule 3334

> rule 1 /^55553/ /3/

> voice translation-profile inbound_from_r1

> translate called 3334

> dial-peer voice 1 voip

> destination-pattern 1...

> translation-profile incoming inbound_from_r1

> session target ipv4:172.16.200.1

> incoming called-number .

>

> test voice translation-rule 3334 55553334

> Matched with rule 1

> Original number: 55553334 Translated number: 3334

> Original number type: none Translated number type: none

> Original number plan: none Translated number plan: none

>

> -ryan

>

> -----Original Message-----

> From: nobody_at_groupstudy.com
[mailto:nobody_at_groupstudy.com] On Behalf Of Iam Here

> Sent: Thursday, April 05, 2012 9:33 PM

> To: ccielab_at_groupstudy.com

> Subject: Translation-rule problem

>

> I have the Following topology for 2 CUCME

>

> phone_1111 Phone_3333

> | ---R1 ------------------------------R2 ---|

> Phone_1112 Phone_3334

>

>

> I configured R1 so that when Phone_1111 dials 3333 or 3334 numbers the a translation rule converts it to 55553333 or 55553334 and send it to R2 then the translation rule on R2 convert the 55553333 or 55553334 to 3333 or 3334 but it always gives me busy

>

> I think there is something wrong in the config below , (Sorry I am not expert in the voice )

>

> R1

> ==

> translation-rule 1

> Rule 1 ^3 55553

>

> dial-peer voice 2 voip

> destination-pattern 3...

> translate-outgoing called 1

> session target ipv4:172.16.200.2

> !

> dial-peer voice 5555 voip

> destination-pattern 55553...

> session target ipv4:172.16.200.2

>

> R2

> ===

> translation-rule 3334

> Rule 1 ^55553 3

>

> dial-peer voice 1 voip

> destination-pattern 1...

> session target ipv4:172.16.200.1

> !

> dial-peer voice 3334 voip

> destination-pattern 3...

> translate-outgoing called 3334

> incoming called-number .

>

>

> Blogs and organic groups at http://www.ccie.net

>

> _______________________________________________________________________

> Subscription information may be found at:

> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Apr 06 2012 - 05:50:55 ART