Re: Hunt group but the final number is located in another site

So now we are dealing with 3334 as the final number instead of 4444? (3334
after be macro-expanded)

So first off, things that I see that you will want to add are things like
"dtmf-relay h245-signal" as well as "incoming called-number ." on both of your
voip dial peers.

Next, change your final to what you want to ring (3334 is sounds like) and get
rid of the num-exp unless you have some other critical need for it.

Finally, run a "debug cch323 h225" and a "debug cch323 245" and send us the
results after you make a call to the HG.

--
Mark Snow, CCIE #14073 (Voice/Security)
msnow_at_INE.com
Internetwork Expert, Inc.
http://www.INE.com
On Apr 4, 2012, at 4:18 PM, Iam Here wrote:
> I can dial 4501 directly from all the ip phones registered to R1
>
> I make the call from 3333 to 1000 and then 1111 rings and then 1112 and
finally gives me busy when he tries to call 4444
>
> R1 config
> ======
> num-exp 4444 3334
>
> ephone-hunt 1 sequential
>  pilot 1000
>  list 1111, 1112
>  final 4444
>  timeout 5
>
> dial-peer voice 1 voip
>  preference 1
>  destination-pattern 3...
>  session target ipv4:172.16.100.2
> !
> telephony-service
>  max-ephones 10
>  max-dn 40
>  ip source-address 1.1.1.1 port 2000
>  max-conferences 8 gain -6
> !
> !
> ephone-dn  1  dual-line
>  no call-waiting beep
>  number 1111
>  label Phone_1111
>  name Phone_1
> !
> !
> ephone-dn  2  dual-line
>  no call-waiting beep
>  number 1112
>  label Phone_1112
>  name Phone_2
>
> ephone-dn  3
>  number 1100
>  label Shared_1100
>  name Shared_Line_1100
> !&nb sp;
> !
> ephone  1
>  mac-address 0000.1111.1111
>  button  1:1 2:3
> !
>
> ephone  2
>  mac-address 0000.2222.2222
>  button  1:2 2:3
> !
>
>
>
> R2 config
> ======
> dial-peer voice 1 voip
>  destination-pattern 1...
>  session target ipv4:1.1.1.1
>
> telephony-service
>  max-ephones 10
>  max-dn 40
>  ip source-address 10.22.22.1 port 2000
>
> ephone-dn  1  dual-line
>  number 3333
>  label Phone_3333
>
> ephone-dn  2  dual-line
>  number 3334
> !
> !
> ephone  1
>  mac-address 0000.3333.3333
>   ;button  1:1 2:2
>
>
>
> Subject: Re: Hunt group but the final number is located in another site
> From: msnow_at_ine.com
> Date: Wed, 4 Apr 2012 15:44:18 -0400
> CC: ccielab_at_groupstudy.com
> To: go_soon2010_at_hotmail.com
>
> Hey Iam,
>
> So, if you just dial 4501 directly, it does not give you a busy tone?
>
> Can you include your sanitized configs from both this HG router and the far
end you are trying to connect to?
>
>
> --
> Mark Snow, CCIE #14073 (Voice/Security)
> msnow_at_INE.com
>
> Internetwork Expert, Inc.
> http://www.INE.com
>
>
>
> On Apr 4, 2012, at 3:28 PM, Iam Here wrote:
>
> The customer has site-1 with hunt group (pilot 1000 and list 1100,1101 and
the final number is 4501)  but the final number is in another site
(Site-2)when i make a call to 1000 it goes first to 1100 then 1101 but it
gives busy tone when it should dial 4501 )We can access 4501 through voip dial
peer Should i use another method other than the hunt group to fulfill that or
what ?
> I tried exp-num and also to create ephone-dn with forward to 4501 but still
gives me Busy tone
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net