RE: Hunt group but the final number is located in another site

I can dial 4501 directly from all the ip phones registered to R1

I make the call from 3333 to 1000 and then 1111 rings and then 1112 and finally gives me busy when he tries to call 4444

R1 config
======
num-exp 4444 3334

ephone-hunt 1 sequential

 pilot 1000

 list 1111, 1112

 final 4444

 timeout 5

dial-peer voice 1 voip
 preference 1
 destination-pattern 3...
 session target ipv4:172.16.100.2
!
telephony-service
 max-ephones 10
 max-dn 40
 ip source-address 1.1.1.1 port 2000
 max-conferences 8 gain -6
!
!
ephone-dn 1 dual-line
 no call-waiting beep
 number 1111
 label Phone_1111
 name Phone_1
!
!
ephone-dn 2 dual-line
 no call-waiting beep
 number 1112
 label Phone_1112
 name Phone_2
         
ephone-dn 3
 number 1100
 label Shared_1100
 name Shared_Line_1100
!
!
ephone 1
 mac-address 0000.1111.1111
 button 1:1 2:3
!
       
ephone 2
 mac-address 0000.2222.2222
 button 1:2 2:3
!

R2 config
======
dial-peer voice 1 voip
 destination-pattern 1...
 session target ipv4:1.1.1.1

telephony-service
 max-ephones 10
 max-dn 40
 ip source-address 10.22.22.1 port 2000

ephone-dn 1 dual-line
 number 3333
 label Phone_3333

ephone-dn 2 dual-line
 number 3334
!
!
ephone 1
 mac-address 0000.3333.3333
 button 1:1 2:2

Subject: Re: Hunt group but the final number is located in another site
From: msnow_at_ine.com
Date: Wed, 4 Apr 2012 15:44:18 -0400
CC: ccielab_at_groupstudy.com
To: go_soon2010_at_hotmail.com

Hey Iam,
So, if you just dial 4501 directly, it does not give you a busy tone?
Can you include your sanitized configs from both this HG router and the far end you are trying to connect to?

-- Mark Snow, CCIE #14073 (Voice/Security)msnow_at_INE.com
Internetwork Expert, Inc.http://www.INE.com

On Apr 4, 2012, at 3:28 PM, Iam Here wrote:The customer has site-1 with hunt group (pilot 1000 and list 1100,1101 and the final number is 4501) but the final number is in another site (Site-2)when i make a call to 1000 it goes first to 1100 then 1101 but it gives busy tone when it should dial 4501 )We can access 4501 through voip dial peer Should i use another method other than the hunt group to fulfill that or what ?
I tried exp-num and also to create ephone-dn with forward to 4501 but still gives me Busy tone

Blogs and organic groups at http://www.ccie.net
Received on Wed Apr 04 2012 - 23:18:48 ART