RE: Nexus Vrf

Hi,

On Fri, Mar 30, 2012 at 10:01:27, OLUSEGUN DADA wrote:
> Cc: CCIE GROUPSTUDY
> Subject: RE: Nexus Vrf
>
>
> My management interface is not connected to a management network. my
> ntp, syslog, tacacs, snmp, are in a different vlan. i believe to use
> the management interface, routing has to occur. A default gateway has
> to be configured for the Management Vrf. the problem is pointing the
> default route to other Vrf (Default Vrf in my case).

If you don't have a management network, you can connect each 5500 to the other 5500 and bridge the management network to inband. If you're using only 5500's, without FEX's, a GLC-T should do the trick. A FEX will work as well. I'm not sure if you intend on using DCNM, but you'll need to expose access to the mgmt0 for that product to fully work as well.

-ryan

Blogs and organic groups at http://www.ccie.net
Received on Fri Mar 30 2012 - 14:23:03 ART