Re: EEM show run filter help..

Thanks Daniel & Aaron for reply..

I also tested it on 7200 GNS image its working.. it new commands 12.4(22)T
or higher release support it..

Thanks :)

On Wed, Mar 7, 2012 at 5:14 PM, Daniel Kratz <dkratz_at_gmail.com> wrote:

> Hi Arslan,
>
> The event tag is part of version 2.4 of Embedded Event Manager framework
> [1]. The event tag command is used to program multi-event detection and
> event correlation implementation. EEM v2.4 was introduced on release
> 12.4(20)T.
>
> You are running 12.4(15)T13 Advance Enterprise Services with SNA. If you
> search in feature navigator you will be aware that these images only
> support versions 2.1 and 2.2 of EEM framework.
>
> Unfortunately youll not be able to run this on 3725, at least in 12.4(T)
> trail. If you have access to IOS image you can try run this on 7200.
> This is the boring side of EEM in the real life you can understand what
> features are supported by your running software. EMM have many releases:
> 1.0, 2.0, 2.1, 2.2, 2.3, 2.4, 3.0, 3.1, 3.2 and 4.0. For now, in the lab
> youll have support up to EEM 3.0.
>
> []4s
> Kratz
>
>
>
> 2012/3/6 Arslan Ahmed <arslanahmed4_at_gmail.com>
>
>> Hi everyone,
>>
>> Can some body help me with EEM configuration. I want to filter show run
>> with EEM applet.
>>
>> I found the method from somewhere but some commands are not in the router.
>> i am using GNS3,
>>
>> Router IOS : Cisco IOS Software, 3700 Software
>> (C3745-ADVENTERPRISEK9_SNA-M), Version 12.4(15)T13, RELEASE SOFTWARE (fc3)
>>
>> Method :
>> -------------------------------------------------------------------------
>> event manager applet SHOW_RUN_FILTER
>> event tag 1.0 cli pattern "show run" sync yes
>> action 1.0 cli command "enable"
>> action 2.0 cli command "show run | exclude username"
>> action 3.0 puts $_cli_result
>> action 4.0 set $_exit_status 0
>> -------------------------------------------------------------------------
>>
>> but there isn't any command event tag in event manager applet mode, when i
>> type event ? i get the below output and also there isn't any command
>> "action puts" and "action set" in router. do i need to install something
>> in
>> router ?
>>
>> OUTPUT
>> ------------------------------
>>
>> R3(config-applet)#event ?
>> application Application specific event
>> cli CLI event
>> counter Counter event
>> interface Interface event
>> ioswdsysmon IOS WDSysMon event
>> none Manually run policy event
>> oir OIR event
>> resource Resource event
>> snmp SNMP event
>> syslog Syslog event
>> timer Timer event
>> track Tracking object event
>>
>> ------------------------------
>>
>>
>> Thanks.
>>
>> ---------------------
>> Best Regards
>> Arslan Ahmed
>>
>> Certified
>> ------------------
>> CCNA, CCNP, CCIE R&S Written.
>> JNCIA-Junos, JNCIA-ER, JNCIA-EX, JNCIS-ER, JNCIS-SEC.
>>
>> Email : arslanahmed4_at_gmail.com
>>
>> ---------------------------------------
>> **
>>
>> Disclaimer
>> This email is confidential, may be legally privileged, and is for the
>> intended recipient only. Access, disclosure, copying, distribution, or
>> reliance on any of it by anyone else is prohibited and may be a criminal
>> offense. Please delete if obtained in error and email confirmation to the
>> sender.
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> "Any fool can know. The point is to understand."
> Albert Einstein
>

--
---------------------
Best Regards
Arslan Ahmed
Certified
------------------
CCNA, CCNP, CCIE R&S Written.
 JNCIA-Junos, JNCIA-ER, JNCIA-EX, JNCIS-ER, JNCIS-SEC.
Email : arslanahmed4_at_gmail.com
---------------------------------------
**
Disclaimer
This email is confidential, may be legally privileged, and is for the
intended recipient only. Access, disclosure, copying, distribution, or
reliance on any of it by anyone else is prohibited and may be a criminal
offense. Please delete if obtained in error and email confirmation to the
sender.
Blogs and organic groups at http://www.ccie.net