Re: distance 0.0.0.0 255.255.255.255 [word] - standard ip

Sorry nick. I meant AD.... Thanks for clarification

On Wednesday, January 25, 2012, Nick E <ccienovice_at_gmail.com> wrote:
> Hi Marc,
>
> distance command will change the AD on the router and not the metric. If
you want change the metric use the below command:-
>
> redistribute eigrp 30 metric 171 subnets
>
> Cheers,
> Nick
>
> On Wed, Jan 25, 2012 at 11:00 AM, marc edwards <renorider_at_gmail.com>
wrote:
>>
>> I have :
>>
>> lo7-SW3->EIGRP->R4->OSPF->R1
>>
>> lo7 shows up in r4 table as eigrp external:
>>
>> D EX 135.15.107.0 [170/261120] via 135.15.20.7, 04:47:15,
FastEthernet0/0
>>
>> I am redistributing this into ospf 1 and sending along to r1
>>
>> Type-5 AS External Link States
>>
>> Link ID ADV Router Age Seq# Checksum Tag
>> 135.15.107.0 135.15.104.1 1314 0x80000002 0x009409 0
>>
>> Furthermore this is advertised with AD of 171 not to overtake routes that
>> could potentially show up on neighbor with a 'distance 171 0.0.0.0
>> 255.255.255.255 ospf-distance'
>>
>> R4#sh ip access-lists ospf-distance
>> Standard IP access list ospf-distance
>> 10 permit 135.15.107.0
>> 20 permit 135.15.110.0
>> 30 permit 135.15.120.0
>>
>> I am not seeing any hits on ACL nor am these routes on R1 with a distance
>> of 171:
>>
>> O E2 135.15.107.0 [110/20] via 135.15.14.4, 00:00:17, Serial0/0/0.14
>>
>>
>> Here is relavant config on R4:
>>
>> router ospf 1
>> log-adjacency-changes
>> area 10 virtual-link 135.15.101.1
>> redistribute connected subnets route-map connected->ospf
>> redistribute eigrp 30 subnets route-map eigrp->ospf
>> network 135.15.10.4 0.0.0.0 area 0
>> network 135.15.14.4 0.0.0.0 area 10
>> network 135.15.34.4 0.0.0.0 area 10
>> distance 171 0.0.0.0 255.255.255.255 ospf-distance
>>
>> ip access-list standard ospf-distance
>> permit 135.15.107.0
>> permit 135.15.110.0
>> permit 135.15.120.0
>>
>>
>> I thought this would redistribute eigrp learned route with metric of 171
to
>> neighbors. This isn't a big problem on R1 but it causes a recursive
routing
>> problem on neighbor R5.... Am I not understanding how this command works?
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Jan 25 2012 - 06:36:47 ART