Re: distance 0.0.0.0 255.255.255.255 [word] - standard ip

Btw. Still no change to AD.

On Wednesday, January 25, 2012, marc edwards <renorider_at_gmail.com> wrote:
> Sorry nick. I meant AD.... Thanks for clarification
>
> On Wednesday, January 25, 2012, Nick E <ccienovice_at_gmail.com> wrote:
>> Hi Marc,
>>
>> distance command will change the AD on the router and not the metric. If
you want change the metric use the below command:-
>>
>> redistribute eigrp 30 metric 171 subnets
>>
>> Cheers,
>> Nick
>>
>> On Wed, Jan 25, 2012 at 11:00 AM, marc edwards <renorider_at_gmail.com>
wrote:
>>>
>>> I have :
>>>
>>> lo7-SW3->EIGRP->R4->OSPF->R1
>>>
>>> lo7 shows up in r4 table as eigrp external:
>>>
>>> D EX 135.15.107.0 [170/261120] via 135.15.20.7, 04:47:15,
FastEthernet0/0
>>>
>>> I am redistributing this into ospf 1 and sending along to r1
>>>
>>> Type-5 AS External Link States
>>>
>>> Link ID ADV Router Age Seq# Checksum Tag
>>> 135.15.107.0 135.15.104.1 1314 0x80000002 0x009409 0
>>>
>>> Furthermore this is advertised with AD of 171 not to overtake routes
that
>>> could potentially show up on neighbor with a 'distance 171 0.0.0.0
>>> 255.255.255.255 ospf-distance'
>>>
>>> R4#sh ip access-lists ospf-distance
>>> Standard IP access list ospf-distance
>>> 10 permit 135.15.107.0
>>> 20 permit 135.15.110.0
>>> 30 permit 135.15.120.0
>>>
>>> I am not seeing any hits on ACL nor am these routes on R1 with a
distance
>>> of 171:
>>>
>>> O E2 135.15.107.0 [110/20] via 135.15.14.4, 00:00:17, Serial0/0/0.14
>>>
>>>
>>> Here is relavant config on R4:
>>>
>>> router ospf 1
>>> log-adjacency-changes
>>> area 10 virtual-link 135.15.101.1
>>> redistribute connected subnets route-map connected->ospf
>>> redistribute eigrp 30 subnets route-map eigrp->ospf
>>> network 135.15.10.4 0.0.0.0 area 0
>>> network 135.15.14.4 0.0.0.0 area 10
>>> network 135.15.34.4 0.0.0.0 area 10
>>> distance 171 0.0.0.0 255.255.255.255 ospf-distance
>>>
>>> ip access-list standard ospf-distance
>>> permit 135.15.107.0
>>> permit 135.15.110.0
>>> permit 135.15.120.0
>>>
>>>
>>> I thought this would redistribute eigrp learned route with metric of
171 to
>>> neighbors. This isn't a big problem on R1 but it causes a recursive
routing
>>> problem on neighbor R5.... Am I not understanding how this command
works?
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Jan 25 2012 - 06:37:45 ART