Re: IPv6 Link-Local Address Changes

Hi Tom,

If the task restrictions allow it, go for it especially if it makes you
more comfortable but don't go out of your way to bloat up the configs much
beyond the bare minimum required to get things over the line. Personally I
would do it your way, as it's less likely to get things wrong and in the
frame maps it becomes very obvious what peer device you are associating the
PVC with but definitely worth within the restrictions or you lose your
points.

Cheers,
Adam

On Thu, Dec 1, 2011 at 12:45 PM, Tom Kacprzynski <tom.kac_at_gmail.com> wrote:

> Just a quick general question. In most of the solutions provided in
> Solution Guide of labs I'm using, the IPv6 link-local address of serial
> interfaces is changed to something like Fe80::1 for R1, FE80::2 for R1 etc.
> Is that something that would be allowed in the lab or is that just shown to
> make the solution easier to understand? I'm curious as I always mess up on
> the FR mapping for those and it would make life a lot easier if I could
> just change it to something easier.
>
>
>
> Thank you in advance for responses.
>
>
>
> Tom
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Dec 01 2011 - 12:56:37 ART