RE: dot1x missing?

Do you actually have a radius server configured ?

From: -Hammer- [mailto:bhmccie_at_gmail.com]
Sent: Friday, July 22, 2011 2:25 PM
To: Joseph L. Brunner
Cc: ccielab_at_groupstudy.com
Subject: Re: dot1x missing?

Ha! Hey Joe. Nice try but I already have it enabled. :)

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Cat3560-2(config)#do sho run | in aaa
aaa new-model
aaa authentication login default none
aaa authentication dot1x default group radius
aaa session-id common
Cat3560-2(config)#
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I'm clearly misunderstanding something. See below. I can apply "force-author"
and nothing happens. I apply "auto" and it works. I go back and apply "force
author" and it stops displaying again.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Cat3560-2(config-if)#do sho run int gi0/6
Building configuration...

Current configuration : 134 bytes
!
interface GigabitEthernet0/6
 description R6 Fa0/0
 switchport access vlan 567
 switchport mode access
 spanning-tree portfast
end

Cat3560-2(config-if)#int gi0/6
Cat3560-2(config-if)#dot1x port force-author
Cat3560-2(config-if)#do sho run int gi0/6
Building configuration...

Current configuration : 134 bytes
!
interface GigabitEthernet0/6
 description R6 Fa0/0
 switchport access vlan 567
 switchport mode access
 spanning-tree portfast
end

Cat3560-2(config-if)#dot1x port auto
Cat3560-2(config-if)#
Cat3560-2(config-if)#
Cat3560-2(config-if)#
01:43:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/6,
changed state to down
Cat3560-2(config-if)#
Cat3560-2(config-if)#do sho run int gi0/6
Building configuration...

Current configuration : 160 bytes
!
interface GigabitEthernet0/6
 description R6 Fa0/0
 switchport access vlan 567
 switchport mode access
 dot1x port-control auto
 spanning-tree portfast
end

Cat3560-2(config-if)#
Cat3560-2(config-if)#dot1x port force-author
Cat3560-2(config-if)#
Cat3560-2(config-if)#
01:43:30: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/6,
changed state to up
Cat3560-2(config-if)#
Cat3560-2(config-if)#do sho run int gi0/6
Building configuration...

Current configuration : 134 bytes
!
interface GigabitEthernet0/6
 description R6 Fa0/0
 switchport access vlan 567
 switchport mode access
 spanning-tree portfast
end

Cat3560-2(config-if)#
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

-Hammer-

"I was a normal American nerd"

-Jack Herer

On 07/22/2011 01:18 PM, Joseph L. Brunner wrote:

Enabling it globally?

Please hammer, don't hurt 'em!

Aaa new-model

Aaa authen dot1x default group radius

dot1x system-auth-control

Now you're "too legit to quit" and you "can touch this"

-joe

-----Original Message-----

From: nobody_at_groupstudy.com<mailto:nobody_at_groupstudy.com>
[mailto:nobody_at_groupstudy.com] On Behalf Of -Hammer-

Sent: Friday, July 22, 2011 1:53 PM

To: ccielab_at_groupstudy.com<mailto:ccielab_at_groupstudy.com>

Subject: dot1x missing?

I know the trick that dot1x commands won't show up on an interface until

it's in access but am I missing something else here?

Port enabled

Dot1x enabled

port in access mode

dot1x configuration to port - FAIL

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!

Cat3560-2(config)#do sho run | in dot

aaa authentication dot1x default group radius

dot1x system-auth-control

vlan dot1q tag native

Cat3560-2(config)#do sho run int gi0/6

Building configuration...

Current configuration : 110 bytes

!

interface GigabitEthernet0/6

  description R6 Fa0/0

  switchport access vlan 567

  switchport mode access

end

Cat3560-2(config)#int gi0/6

Cat3560-2(config-if)#dot1x port-control force-author

Cat3560-2(config-if)#do sho run int gi0/6

Building configuration...

Current configuration : 110 bytes

!

interface GigabitEthernet0/6

  description R6 Fa0/0

  switchport access vlan 567

  switchport mode access

end

Cat3560-2(config-if)#

Cat3560-2(config-if)#do sho dot1x

Sysauthcontrol = Enabled

Supplicant Allowed In Guest Vlan = Disabled

Dot1x Protocol Version = 1

Dot1x Oper Controlled Directions = Both

Dot1x Admin Controlled Directions = Both

Cat3560-2(config-if)#do sho dot1x all

No Dot1x Configuration exists

Cat3560-2(config-if)#

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!

Blogs and organic groups at http://www.ccie.net
Received on Fri Jul 22 2011 - 18:26:34 ART