Re: dot1x missing?

Ha! Hey Joe. Nice try but I already have it enabled. :)

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Cat3560-2(config)#do sho run | in aaa
aaa new-model
aaa authentication login default none
aaa authentication dot1x default group radius
aaa session-id common
Cat3560-2(config)#
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I'm clearly misunderstanding something. See below. I can apply
"force-author" and nothing happens. I apply "auto" and it works. I go
back and apply "force author" and it stops displaying again.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Cat3560-2(config-if)#do sho run int gi0/6
Building configuration...

Current configuration : 134 bytes
!
interface GigabitEthernet0/6
  description R6 Fa0/0
  switchport access vlan 567
  switchport mode access
  spanning-tree portfast
end

Cat3560-2(config-if)#int gi0/6
Cat3560-2(config-if)#dot1x port force-author
Cat3560-2(config-if)#do sho run int gi0/6
Building configuration...

Current configuration : 134 bytes
!
interface GigabitEthernet0/6
  description R6 Fa0/0
  switchport access vlan 567
  switchport mode access
  spanning-tree portfast
end

Cat3560-2(config-if)#dot1x port auto
Cat3560-2(config-if)#
Cat3560-2(config-if)#
Cat3560-2(config-if)#
01:43:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/6, changed state to down
Cat3560-2(config-if)#
Cat3560-2(config-if)#do sho run int gi0/6
Building configuration...

Current configuration : 160 bytes
!
interface GigabitEthernet0/6
  description R6 Fa0/0
  switchport access vlan 567
  switchport mode access
  dot1x port-control auto
  spanning-tree portfast
end

Cat3560-2(config-if)#
Cat3560-2(config-if)#dot1x port force-author
Cat3560-2(config-if)#
Cat3560-2(config-if)#
01:43:30: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/6, changed state to up
Cat3560-2(config-if)#
Cat3560-2(config-if)#do sho run int gi0/6
Building configuration...

Current configuration : 134 bytes
!
interface GigabitEthernet0/6
  description R6 Fa0/0
  switchport access vlan 567
  switchport mode access
  spanning-tree portfast
end

Cat3560-2(config-if)#
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

-Hammer-

"I was a normal American nerd"
-Jack Herer

On 07/22/2011 01:18 PM, Joseph L. Brunner wrote:
> Enabling it globally?
>
> Please hammer, don't hurt 'em!
>
> Aaa new-model
> Aaa authen dot1x default group radius
>
> dot1x system-auth-control
>
> Now you're "too legit to quit" and you "can touch this"
>
> -joe
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of -Hammer-
> Sent: Friday, July 22, 2011 1:53 PM
> To: ccielab_at_groupstudy.com
> Subject: dot1x missing?
>
> I know the trick that dot1x commands won't show up on an interface until
> it's in access but am I missing something else here?
> Port enabled
> Dot1x enabled
> port in access mode
> dot1x configuration to port - FAIL
>
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> Cat3560-2(config)#do sho run | in dot
> aaa authentication dot1x default group radius
> dot1x system-auth-control
> vlan dot1q tag native
> Cat3560-2(config)#do sho run int gi0/6
> Building configuration...
>
> Current configuration : 110 bytes
> !
> interface GigabitEthernet0/6
> description R6 Fa0/0
> switchport access vlan 567
> switchport mode access
> end
>
> Cat3560-2(config)#int gi0/6
> Cat3560-2(config-if)#dot1x port-control force-author
> Cat3560-2(config-if)#do sho run int gi0/6
> Building configuration...
>
> Current configuration : 110 bytes
> !
> interface GigabitEthernet0/6
> description R6 Fa0/0
> switchport access vlan 567
> switchport mode access
> end
>
> Cat3560-2(config-if)#
> Cat3560-2(config-if)#do sho dot1x
> Sysauthcontrol = Enabled
> Supplicant Allowed In Guest Vlan = Disabled
> Dot1x Protocol Version = 1
> Dot1x Oper Controlled Directions = Both
> Dot1x Admin Controlled Directions = Both
>
> Cat3560-2(config-if)#do sho dot1x all
> No Dot1x Configuration exists
> Cat3560-2(config-if)#
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Blogs and organic groups at http://www.ccie.net
Received on Fri Jul 22 2011 - 13:25:04 ART