Re: OIR Installing a standby RSP720 with different

done, thanks for the help!

On Sat, Jul 16, 2011 at 3:15 AM, Abraham, Tharak <tharakabraham_at_gmail.com>wrote:

> Hi Persio,
>
> There shouldn't be any problem.You can manually syn the configs.
> You may need to enter the redundancy mode by typing
>
> (config)#redundancy
> (config-red)#main-cpu
> (config-x-x)#auto-sync ?
>
> there will be options to sync the startup/running config.
>
> and also make sure you IOS matches in the master and slave.
>
>
> Best Regards,
> Tharak Abraham Luke
>
>
> On Fri, Jul 15, 2011 at 7:16 PM, Persio Pucci <persio_at_gmail.com> wrote:
>
>> Hi folks,
>>
>> I have a 7609 that was running with two RSP720, and I had one (standby)
>> removed last week. I got a replacement today but I believe it has a
>> totally
>> different config on it as it used to run on a different router.
>>
>> My question is: when I pop it in on the 7609, will it take any of the
>> configuration on the standby RSP? Will it overwrite it? Should I use a "wr
>> mem" after inserting it?
>>
>> Also, I am planing on reloading this router afterwards. It should come up
>> using the same active it had before shutting down, right?
>>
>> Persio
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Jul 17 2011 - 18:00:41 ART