Re: MPLS AToM

also :

R2#sh mpls l2transport vc 1 detail
Local interface: Se1/0 up, line
protocol up, FR DLCI 100 up
  Destination address: 2.2.2.2, VC ID: 1, VC
status: down
    Output interface: unknown, imposed label stack {}
  Create
time: 00:41:17, last status change time: 00:19:28
  Signaling protocol: LDP,
peer 2.2.2.2:0 up
    MPLS VC labels: local 17, remote 17
    Group ID: local
0, remote 0
    MTU: local 1500, remote 1500
    Remote interface description:
  Sequencing: receive disabled, send disabled
  VC statistics:
    packet
totals: receive 0, send 0
    byte totals: receive 0, send 0
    packet
drops: receive 0, seq error 0, send 0

________________________________
From: Nick Jay <wanttobeccde_at_yahoo.com>
To: "ccielab_at_groupstudy.com"
<ccielab_at_groupstudy.com>
Sent: Sunday, July 3, 2011 1:41 AM
Subject: MPLS AToM
Hi Folks,

I am trying to work out some L2TP pseudowire emulation in GNS3. I
am trying to run frame relay over MPLS. I see status to be down. Attached is
the configuration file for R2 and R3 .. Can anyone help me in figuring out
what could be wrong in the config please?

R2#sh mpls l2transport vc 1

Local
intf Local circuit Dest address VC ID Status
------------- -------------------------- --------------- ----------
----------
Se1/0 FR DLCI 100 2.2.2.2 1
 DOWN

When running a debug command "debug mpls l2transport vc events" I get
this.

*Mar 1 03:14:45.783: AToM SMGR: VC [2.2.2.2, 1]: default route not
available: entry had no valid path
CE1--------------->(S1/0)PE1(F0/0)---------->(F0/0)PE2(S1/0)-------->CE2
PE1
and PE2 are acting as frame relay switches with FR switching enabled.

R2#sh
mpls ldp discovery
 Local LDP Identifier:
    1.1.1.1:0
    Discovery Sources:
    Interfaces:
        FastEthernet0/0 (ldp): xmit/recv
            LDP Id:
2.2.2.2:0
        Serial1/0 (ldp): xmit
    Targeted Hellos:
        1.1.1.1
-> 2.2.2.2 (ldp): active/passive, xmit/recv
            LDP Id: 2.2.2.2:0
R2#sh mpls interface
Interface IP Tunnel Operational
FastEthernet0/0 Yes (ldp) No Yes
Serial1/0 Yes
(ldp) No Yes

R2#sh mpls ldp neighbor
    Peer LDP Ident: 2.2.2.2:0;
Local LDP Ident 1.1.1.1:0
        TCP connection: 2.2.2.2.25231 - 1.1.1.1.646
        State: Oper; Msgs sent/rcvd: 18/18; Downstream
        Up time:
00:09:42
        LDP discovery sources:
          FastEthernet0/0, Src IP
addr: 10.10.10.1
          Targeted Hello 1.1.1.1 -> 2.2.2.2, active, passive
        Addresses bound to peer LDP Ident:
          2.2.2.2
10.10.10.1
----PLEASE LET ME KNOW IF ANY OTHER OUTPUT NEEDS TO BE SHARED----

Blogs and organic groups at http://www.ccie.net
Received on Sat Jul 02 2011 - 13:16:05 ART