OT: Unable to implement proper Policing on Cisco 4500E with

Hi Masters,

I am unable to do the proper policing on Cisco 4503E with Sup7E, have
applied all the mathematical equations to get the desire result but don't
understand why it is not happening. the simple config is as under

class-map c1
 match any
!
 policy-map p1
   class class-default
     police rate 1024000 bps burst 4096 bytes peak-burst 4096 bytes
      conform-action transmit
      exceed-action drop
 !
 interface GigabitEthernet2/13
   description ACCUTRON
   switchport mode access
   switchport access vlan 13
   spanning-tree portfast
   service-policy input p1
   service-policy output p1

When I applied the above configuration and check the bandwidth on interface
it actually give max throughput of 700 kbps and not 1Mbps.

Please guide me if I am making any mistakes.

Thanks in Advance.

Regards,
Yatin Dave

Blogs and organic groups at http://www.ccie.net
Received on Tue Mar 15 2011 - 20:01:45 ART