Re: OT: Unable to implement proper Policing on Cisco 4500E with

Should classmap c1 be under policymap p1 ?

Aaron

On Mar 15, 2011, at 9:31 AM, Yatin Dave <dave.yatin_at_gmail.com> wrote:

> Hi Masters,
>
> I am unable to do the proper policing on Cisco 4503E with Sup7E, have
> applied all the mathematical equations to get the desire result but don't
> understand why it is not happening. the simple config is as under
>
> class-map c1
> match any
> !
> policy-map p1
> class class-default
> police rate 1024000 bps burst 4096 bytes peak-burst 4096 bytes
> conform-action transmit
> exceed-action drop
> !
> interface GigabitEthernet2/13
> description ACCUTRON
> switchport mode access
> switchport access vlan 13
> spanning-tree portfast
> service-policy input p1
> service-policy output p1
>
> When I applied the above configuration and check the bandwidth on interface
> it actually give max throughput of 700 kbps and not 1Mbps.
>
> Please guide me if I am making any mistakes.
>
>
> Thanks in Advance.
>
> Regards,
> Yatin Dave
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Mar 15 2011 - 10:49:23 ART