Re: IOS - running multiple commands in one line

I tried Brian's solution under tclsh using the same command you posted and
it worked like a champ!

CAT3(tcl)#
CAT3(tcl)#show flash;ping 5.5.5.5

Directory of flash:/

    2 -rwx 924 Mar 1 1993 00:41:27 +00:00 vlan.dat
    3 -rwx 9860621 Mar 1 1993 00:13:02 +00:00
 c3560-advipservicesk9-mz.122-40.SE.bin
    4 -rwx 1048 Mar 28 1993 11:18:46 +00:00 multiple-fs
    5 drwx 64 Mar 1 1993 00:40:48 +00:00
 c3560-ipservicesk9-mz.122-50.SE3
    8 -rwx 24 Mar 28 1993 11:18:46 +00:00 private-config.text
    9 -rwx 3527 Mar 28 1993 11:18:46 +00:00 config.text

32514048 bytes total (10543616 bytes free)
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 5.5.5.5, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/8 ms
CAT3(tcl)#

On Mon, Mar 7, 2011 at 2:54 PM, Radioactive Frog <pbhatkoti_at_gmail.com>wrote:

> Is there a way to do this?
>
> like
>
> router#ping 5.5.5.5 ; show flash:
>
> just in one line?
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
-Steve Di Bias
Blogs and organic groups at http://www.ccie.net